Devil Gundam: Redesigning Piston [Leg Modification - Part 26]
Hi guys!
Today I will continue my new piston building with the new method. I really do hope this one will work. So here are updates on Project Devil Gundam!
Today I will continue my new piston building with the new method. I really do hope this one will work. So here are updates on Project Devil Gundam!
Even more copies
As I haven't decide the actually length of the piston, I'm going to make a longer piston than I would actually need.
The steps are quite straight forward. First I marked the pla strips I've prepared ealier.
By prepared means, I've sand the surface and edges a little bit. Then simply trim them off the strips as close as I can get.
The steps are quite straight forward. First I marked the pla strips I've prepared ealier.
By prepared means, I've sand the surface and edges a little bit. Then simply trim them off the strips as close as I can get.
Cementing the pla plates together
I start with one batch of pla plates. I cement the pla plates one by one while using the rods to align the holes in between cementing.
As usual I used 2 type of cement, the thin cement will hold the pla plates in place. Then the regular cement will make a stronger bond.
As usual I used 2 type of cement, the thin cement will hold the pla plates in place. Then the regular cement will make a stronger bond.
Rinse and repeat
I repeat the process 7 times since this first batch is going to 7 mm long. Then I will let the cement to cure properly overnight as always.
Tomorrow I hope I can trim and file the excess plastic making it round like a piston. Then do a couple of test fits.
So this is my updates for today on this Devil Gundam x Neue Ziel Project.
Keep on building! Keep on steeming! Have a nice day!
Tomorrow I hope I can trim and file the excess plastic making it round like a piston. Then do a couple of test fits.
So this is my updates for today on this Devil Gundam x Neue Ziel Project.
Keep on building! Keep on steeming! Have a nice day!
Quick access tutorial:
- Fixing broken peg using gunpla runer and several tools.
- Fixing holes using cement and plastic scraps.
Sneaky Ninja Attack! You have just been defended with a 1.72% upvote!
I was summoned by @devytan. I have done their bidding and now I will vanish...
woosh
A portion of the proceeds from your bid was used in support of youarehope and tarc.
Abuse Policy
Rules
How to use Sneaky Ninja
How it works
Victim of grumpycat?
You just planted 0.28 tree(s)!
Thanks to @devytan
We have planted already 5217.82 trees
out of 1,000,000
Let's save and restore Abongphen Highland Forest
in Cameroonian village Kedjom-Keku!
Plant trees with @treeplanter and get paid for it!
My Steem Power = 25231.12
Thanks a lot!
@martin.mikes coordinator of @kedjom-keku