Devil Gundam: Detailing Scratch Build Knee [Leg Modification - Part 65]

Hi guys!

Today I will copy the details to the other side of the knee also the pla plate on top of the knee. So here are updates on Project Devil Gundam!

First I copy paste the pla plate from the other side. Although, the shape is slightly different I will continue working on the custom panel lines. The slightly different shape is due to the knee not being perfectly symmetrical.

And since this pla plate details on the sides will be quite hard to notice later, I will leave them like this.

Next is the details on the top of the knee. There are 2 pla plates here and 3 custom panel lines I need to copy. That small pla plate trimming turn out quite hard to do but I think it turn out pretty good for a first time.

Here is a progress test fit of the knee, thigh and waist. Notice I haven't used the c-joint?

Since I'm not 100% sure I will be able to remove the knee, I will wait until I completely done detailing the knee then test it.

I will let the last cement cure first before adding the last pla plate on the top of the knee.

After that I will start testing the c-joint and adjust it if necessary (most likely I will need to adjust it to get that perfect balance I want).

And so this is my updates for today on this Devil Gundam x Neue Ziel Project.

Keep on building! Keep on steeming! Have a nice day!