Spielzeuge Teil #001 -- Ein Holzflugzeug / Toys Part # 001 - A wooden airplane
Spielzeuge Teil #001 -- Ein Holzflugzeug
Heute bauen wir ein Holzflugzeug aus Pappelspeerholz.
Toys Part # 001 - A wooden airplane
Today we build a ** wooden airplane ** from poplar lumber.
Material und Werkzeuge
Material
Wie oben bereits erwähnt verwenden wir für das Holzflugzeug Pappelspeerholz 20 mm und 10 mm Stark mit den folgenden Maßen:
- Für die Räder benötigen wir einen Durchmesser von ca. 30 mm bis 35 mm
- Der Flügel hat eine Länge von 270 mm und eine Breite 450 mm und eine Dicke von 10 mm.
- die Luftschreube (Propeller) hat die Maße 100 mm x 20 mm mit der Dicke von 10 mm
- Das Flugzeug mit den Maßen 265 mm x 90 mm Dicke 20 mm
- Zur sicherung der Luftschraube benötigen wor noch einen Ring mit einem innen Durchmesser von 8 mm und einem Ausendurchmesser von 14 mm
Des weiteren benötigen wir noch folgendes;
- Hartwachs Öl
- einen Rundstab 8 mm Durchmesser mit den Maßen; 30 mm Länge für den Propeler und 70 mm als Radachse.
- Weisleim
Werkzeuge
- Tischkreissäge oder eine Handsäge
- Akkubohrer mit 8 mm Holzbohrer und Lochsäge
- eine Raspel
- Schleifpapier 80 bis 240
- Dekopiersäge oder eine Laubsäge
Nun kommen wir zum Vorgehen
Das Vorgehen
Als erstes kommt das Anzeichnen und der Zuschnitt mit der Dekopiersäge.
Material and Tools
Material
As mentioned above, we use poplar lumber 20 mm and 10 mm thick for the wooden airplane with the following dimensions:
- For the wheels we need a diameter of approx. 30 mm to 35 mm
- The wing has a length of 270 mm and a width of 450 mm and a thickness of 10 mm.
- The airscrew (propeller) has the dimensions 100 mm x 20 mm with a thickness of 10 mm
- The plane with dimensions of 265 mm x 90 mm thickness 20 mm
- To secure the propeller wor still need a ring with an inner diameter of 8 mm and an outer diameter of 14 mm
Furthermore, we still need the following;
- hard wax oil
- a round rod 8 mm in diameter with the dimensions; 30 mm length for the propeller and 70 mm as wheel axle.
- Weisleim
Tools
- table saw or a hand saw
- Cordless drill with 8 mm wood drill and hole saw
- a rasp
- Sandpaper 80 to 240
- Deco saw or a jigsaw
Now we come to the procedure
The procedure
First comes the Marking and the Cutting with the Dekopiersäge.
Die Räder werden mit einer Bohrmaschine und einer Lochsäge hergestellt und alle Bohrungen ausgeführt.
The wheels are made with a drill and a hole saw and all drilling done.
Nun folgt das Schleifen und nochmal Schleifen um sowohl das Flugzeug, die Luftschraube und den Flügel in Form zu bringen.
Now it's time to sand and sand again to shape the plane, propeller and wing.
Jetzt folgt der Zusammenbau und das Ölen
Now the assembly and the oiling follows
nun wünschen wir euch noch viel Spaß beim werkeln.
euer Bastler und Co. Team
Danke für eure Unterstützung
Now we wish you a lot of fun while working out.
your Bastler and Co. team
Thank you for your support
You got a 6.07% upvote from @dailyupvotes courtesy of @basterundco!
Please upvote this comment to support the service.
We have a woodworking community here on steemit and would welcome you. We have a discord channel, link here: Woodworking on Steem Discord Channel
⠀