You are viewing a single comment's thread from:
RE: ECCO - Samples arrived, Nickel Sulphate used has been tested
The article said the addition of 10% TiH2 fuel as a hydrogen source , TiH2 500C above all will slowly decompose, the total fuel quality of 1.6g, so the quality of TiH2 0.16g, all the decomposition to produce hydrogen about 70cm3 (atmosphericpressure volume), from the reactor size inside the reactor volume is relatively small, I want to pressure reactor should be relatively high.
In addition, ordinary DC discharges can only glow at very low atmospheric pressure, but pulsed high voltage direct current discharges glow at relatively high pressures.
Thank you for your hard work!
Thankyou for your analysis. Things to hold in mind.
Another question is, does the reactor need no resistance wire to warm up? Thank you
A heater resistance wire is not needed. It is claimed to get up to temperature in 5 minutes. There is 100W per core on the discharges, 800W in total and 15-35W in 1MHz ultrasonics per core.
What time you will go to India test ECCO reactor?I wish you everything goes well, thank you
As things stand now, as soon as Dr. George Egely is ready, which may be in second week July.