Mining: RX 58o 8gb DUAL OC Edition. Gpu1 hangs in OpenCl call,exit. (fixed)
Hey Guys if you have Claymore telling you this: Gpu1 hangs in OpenCl call,exit. this is what i did to fix it.
7x RX 580 8GB DUAL OC Edition on Windows 10 with Claymore 9.7
Bios Modded (only the Straps from 1750 to 2000), Crimson 17.3 Betadriver for Blockchain. 28,2MH/s /card
- I woke up to a crashed Miner.
- One of the GPU was giving out 0,000Mh/s, the rest was fine.
- Windows was giving bluescreens with (Thread stuck in device driver)
what i did:
to figure out which Card was having a hickup i unpluged one after the other until i found it.
took the card out of the rig, pluged a operating one in that slot.
2.1 card worked fine in the slot that was having the problematic card in there b4 so: Its not the riser or anything behind it.
put the faulty card in a slot that was operating fine(just to make sure) result: still 0,000mh/s
unpluged all the cards that did work. left the malfunctioning one in.
flashed original bios back on to the card. - didnt help
ddu - driver uninstall. back to box driver. - didnt help
went and tried several settings for overclock/undervolt etc. didnt help
had a hissy fit. - didnt help
thought the card is EX at this point. pluged the hdmi cable in, works fine ( o.0)
run a heavy benchmarktest on the GPU, worked fine.
ran the Claymore again. 0,000mh/s (repeat step 8)
let the other 6 Cards operate for 2 days and ignore the problem.
took the card and installed it on a different machine that never had a rx 580 in it (fresh driver)
0,000 MH/s for a minute or two with the old watchdog barking about the card hanging in openCL
after a minute or two: holy shit its auctually hashing at box-speed 24,4 MH/S
put the card back in the mining rig: fixed.
long story short: if DDU, new BIOS, OC settings dont fix it. Reinstall Windows or try another PC - it will fix it.
hope this helps.