THE DIARY GAME: 6/8/2020: A VERY BUSY DAY

in STEEM NIGERIA4 years ago

Dear diary,

Today is a bright day since there is no rain. As usual, I went to work, got to office by 8: 47 a.m. I was a bit early today. Let me spare you some of my routines because I have a lot to talk about today.

Picture taken in my sitting room before going out
img_1596719749700.jpg

Preparing some reports
I had left over report from yesterday because the magnetic particles inspection report was not ready. Today, our vendor finally sent it and as I saw the mail I had to close out at my end.

I used 20 minutes to finish weld summary sheet for two jobs. Weld summary is a document that contains all details of the fabrication job. The difference between *weld summary * and visual weld inspection report are : painting report, magnetic particle inspection report, ultrasonic (UT) report, radiographic test (RT) report, and other NDT (Non-destructive Test) reports.

Those listed reports are part of the weld summary sheet, but not included in visual weld inspection report.

After doing the report in my system, I sent it to the printer for printing and the secretary, who is working with the DCC (Document Controller), got it from the printer and arrange it in their respective folders. Each project have it's folder.

So, it’s very easy to finish your visual weld inspection report without finishing the weld summary, because you have to wait for the company doing the NDT to give you their reports.

At my office after printing out my report
img_1596719604533.jpg

As a quality control (QC) / quality assurance (QA) person, you have to supervise the NDT company and follow up on them to give you the reports. So, I was able to close out on my end as their reports got to me via mail.

After that, I got three other new jobs I have to inspect. As we speak, the cutting of the steel members is ongoing and I am to do dimensional control to ensure that all dimensions are correct.

For the first job I inspected today, titled: Follower Centralizing Plates, I spotted a very serious error as I got to site.

The fitter was cutting one of the members at 91mm(91 millimetres) length as against 66 mm dimension in the drawing. I got there while he was cutting and from my experience, I know how long 66mm should be. So, I said to him:

Henry, is that 66mm you are cutting?

IMG_20200806_141813.jpg
taking the measurement again to ensure it's 66mm, though 3mm is added, it's within the acceptable limit

He was startled because he did not know I’m around and looking at him. He quickly carried his tape and after measuring he apologized that he was cutting 91mm instead of 66mm.

Now, that would have caused waste of material and the company would run at a lost for that job, because after everything, he would have still cut out the extra dimension at the point of fabrication when the members will not fit with others.

So, as an inspector, my job is to avoid such mistakes that will cause waste of money. Thus, I inspect before the job starts, while the job is on and after the job is completed.

One of the major things to know as a welding inspector or quality control person is how to use measuring intruments. The paramount ones are measuring taps, callipers* and weld gauges.

The lecture on these intruments is beyond the scope of #thediarygame, so pardon me for not writing about it.

Let me stop here so I can attend to work.

Please feel free to ask questions if you want to know more.

For more information about me, PLEASE SEE MY ‘THIS IS ME’ POST.

I belong to @teamg-nigeria and HERE’S OUR TEAM ANNOUNCEMENT POST.

Have a beautiful time on steem.

Sort:  

Hello there! Oh gosh, you are the admin of steemit Nigeria! I remember we were like chatting on facebook recently right and I have dropped by on one of your appics post. OMG! It's you! It's good that I am not really selective in greeting people on appics. Meeting big names in another platform or so!

I was a quality assurance specialist in a call center before and it is hard to follow the guidelines if you have the heart of being an agent for quite some time. A dilemma if I will report cases that is terminable or save the employment of this person who has a family to feed.

Again, I am honored seeing you here too. Chat again soon.

 4 years ago 

Thank you so much. We seem to be everywhere together.

Quality control is nice when you can do it with love towards people and at the same time refuse to lower your standard.

It's difficult to combine the two, but with wisdom it's very interesting.

I certainly agree with that. See you around!

This post has been rewarded by @beautychicks from @steemcurator04 Account with support from the Steem Community Curation Project."

Keep posting good content and follow @steemitblog for more updates. Keep following all the rules in the Diary Game, as well as improving your Diary post content to get more attention. Thank you, Steemit Team!

The kind of job you do needs adequate attention. Imagine what would happen if you didn't get to the site at the right time to spot the error. You are doing a great job. Please, always keep an eye on the workers so they won't jeopardize your effort as an inspector.

You confused me with all your office terms. Lol.

 4 years ago 

Thanks a lot for coming around. Actually you won't understand except you are here for at least 6 months. It's a very detailed job I'm doing.

Steem on.

Being a QA inspector is not a small job ooo, I noticed that during my internship at Coca-Cola bottling company, all the best brother.

 4 years ago 

Thank you,dear.

You are welcome.

Thank you for taking part in The Diary Game on Steem.

Sorry we missed the voting window on this post. An extra vote will be added to your next Diary Game post.

Keep following @steemitblog for the latest updates.

The Steemit Team

Coin Marketplace

STEEM 0.36
TRX 0.12
JST 0.040
BTC 70839.13
ETH 3563.41
USDT 1.00
SBD 4.77