You are viewing a single comment's thread from:
RE: Running a Cordless Electric Lawn Mower on an eBike Battery?
Very valuable tip, but the mowers I'm looking to convert are 36 volt.
Very valuable tip, but the mowers I'm looking to convert are 36 volt.
I use 3 Cell packs for my 12v applications. Fully charged they are 12.6v (4.2v/Cell) discharged they are about 10.8 I tend to not discharge them below 3.4v/Cell. You could run 3 in series fo 36 Volt the only down side is that you would need to either remove all 3 packs to charge them or use a bunch of balance Chargers and just keep them all hooked up all the time on the balance port.
Most things set for DC have a operating range of voltage. IE automotive accessories are about 10-15v
I really like tinkering with Electricity. I currently replaced my gasoline chainsaw and trimmer for the 40V ryobi series. I was pleasantly surprised when the trimmer head used all my old 32cc gas accessories brush blade and pole saw. Best part is that I charge my batteries off my little off grid solar setup. 200w of panels to a 100 AH 12v battery bank with a 300w 110 inverter.
On the page you linked me it says each one is 22.2 volts though.
Likewise. It's like a silent, powerful butler or genie which can be put to any use. As Captain Nemo said:
The 6 cell packs have a 22.2v nominal charge. 2 would work for a 48v.
Each Cell is 3.6v Nominal with 4.2v fully charged. Think like regular ole alkaline batteries where an AA is 1.5v :)
I have no affiliation with Hobby King they are just a cheap place to get battery packs motors speed controllers and other tinkering gear.
https://hobbyking.com/en_us/batteries/lipo-batteries-all-brands.html