Experimenting with Unusual Tape for 3D Printer Build Plate

in #printing-3d8 years ago

3dp

The surface of the build plate of a 3D printer is very important not only for successful and problem free 3D printing, but also for good quality and reliability of the device. There are a number of specially developed surfaces and coatings developed for 3D printers and there are some others that were not originally intended, but also work well. One of the best build plate surfaces for 3D printers that I have found so far is the BuildTak, though while it works good it is still not perfect and I'm still experimenting. My latest experiment is the use of a bit unusual tape to cover the build plate, an aircraft grade flame retardant fiberglass take - Polyken 296FR.


3dp2

The Polyken 296FR is not a common item and is pretty expensive as it needs to meet some specific requirements for use in aircrafts, but since I got some and I wanted to try it out . The tape is essentially a very strong and flame retardant fiberglass cloth on top with an acrylic adhesive surface on the bottom.


3dp3

There are pretty much two things that a tape covering the build plate needs to do - provide good adhesion of the printed parts and after the print is ready to allow for easy removal of the 3D printed part. Getting both of these balanced right is actually pretty hard as surfaces that usually offer good adhesion also make it hard to remove the printed 3D part after it is ready. Surprisingly the Polyken take actually does offer a really good balance between the two and since it is flame retardant it does not have a problem with heated build plates.


3dp4

The tape also conducts heat well as there is just a slight drop from the set temperature of 50 degrees Celsius for the build plate when printing with PLA filament. The tape is set to work at up to 135 degrees C, so it should not have trouble with ABS filaments that do require higher temperature for the build plate to print properly (100-120 C), though I'm yet to try printing ABS on it.


3dp5

Using regular cheap PLA filament printing at 230 C with 50 C for the heated build plate. The filament sticks well to the surface and is really easy to be removed after that.


3dp6

The texture that is left on the bottom of 3D printed parts is also really nice due to the fiberglass cloth being woven. So this Polyken tape actually does work surprisingly good for 3D printing PLA filaments, though as I already mentioned the price and being not so easy to obtain does not make it a popular choice for build surface. Next I'm going to be trying with ABS filament and higher temperature for the heated build plate to see how well it will work, but so far I'm pretty happy with the results using PLA.


If you have a question or want to add something, then please leave a comment below.


Did you like what you have just read? Check my other posts on steemit @cryptos
If you like what I'm doing for Steem and on Steemit you can support me as a Witness

Sort:  

Great tips here. I wasn't aware of Polyken... what Makerbot model are you using to print this?

Heavily modified Replicator 2.

I think I might mess around with the 3D printer @noganoo has tomorrow.

Also, I think we can only use four tags now... Not sure.

Can you find this post under any tag except the first one right now?

3D printers sure are fun to play with, but you also need to be ready to spend some time figuring things out and each model has its own specifics...

Not sure about the 4 tags, it still accepts 5 when posting, but does not appear to show the post in any other tag besides the first one... maybe some sort of a bug.

Coin Marketplace

STEEM 0.26
TRX 0.21
JST 0.037
BTC 95164.55
ETH 3590.61
USDT 1.00
SBD 3.75