3D 列印之手機固定架

Hello friends, today I have a do-it-yourself post to share with you. I designed and made a tripod bracket using a 3D printer for my phone! The phone holder, designed with Creo Parametric, is made up of 3 pieces, a base, a top, and a screw. A guide rail along the base piece restricts the top piece to mate only in one specific direction.

朋友們大家好！今天來分享自己設計、3D列印做的手機固定架！我用了Creo Parametric來設計此手機固定架，其分爲三個零件：底件、上件、及螺絲。底件上有個導軌限制上件與底件固定的方向。

There is a standard 1/4" female thread at the bottom of the base piece to allow for the attachment to a tripod. When all 3 pieces are assembled, it looks like this：

底件有個標準1/4"内螺紋可以用來將手機固定架鎖在三脚架上，全部組合起來時長這樣：

Assembled View 組合圖	Cross-section View 剖視圖

After printing the pieces, I attached some black foam to the top and base pieces to prevent scratching the phone during use.

爲了防止3D列印的零件在使用中刮傷手機，我在上件及底件上貼了黑色泡棉當緩衝材。

To use, I just slide the phone in between the top and base pieces, then tighten the screw to secure.

使用方法很簡單，把手機放入上件及底件中並將螺絲轉緊即可。

Ready to take some test shots!

組完了可以來拍一些照片測試固定架！

Assembled View Front 前面	Assembled View Back 背面

---

Test Shots 測拍照片

I took these shots with my new Asus Zenfone 4 phone, using the 3D-printed tripod bracket with a mini tripod. To get the best picture quality, I used the lowest ISO setting of 25 and a 2 second timer to take each photo. The RAW photos were edited on my phone using Photoshop Express, and I must say the results really impressed me, you can click each photo to view bigger image!

我用了自製的手機固定架和一個小脚架配上最近新買的Asus Zenfone 4手機拍了以下的照片。爲了達到最佳照片品質我將設定設爲ISO 25以及2秒倒數拍攝，照片為RAW檔，修圖的部分用了手機上的免費軟件Photoshop Express。我對拍出來的結果非常滿意，你可以點開每張照片來檢視！

f/1.8 | 1 sec | ISO 25

f/1.8 | 2 sec | ISO 25

f/1.8 | 1 sec | ISO 25

I tried some 10 second exposure shots, and the results are still really good!

後面我試了一些10秒的長曝，照片品質依然還是非常好！

f/1.8 | 10 sec | ISO 25

f/1.8 | 10 sec | ISO 25

f/1.8 | 10 sec | ISO 25

---

Setup Shots 架設照片

Some shots of the phone holder in action!

一些使用中照片！

---

STL File Download 3D列印檔下載

https://drive.google.com/open?id=0B8J9ouGPlUzQbVBrSGIzWW83TzA

file contains 3 files 壓縮檔含以下三個檔案:

• base.stl
• screw.stl
• top.stl

---

Equipment Used / 使用攝影器材

• Camera: Asus Zenfone 4 (main lens)
• Software: Photoshop Express (mobile app)

Hope you enjoyed this post! I strive hard to provide quality content :)

My goal is to share with this wonderful community my passion in photography, and hopefully contribute to the awesome inspirational content on Steemit.

I read and try to respond to all comments, and welcome any photography related questions and feedback!