Extreme Modification Makes Performance Motor Racing

---

---

The existence of a powerful motor-powered sports certainly make the rider awesome a performance. While the majority of vehicles in general in our country is dominated by small engine capacity, while power and torque has been adjusted to the manufacturer's standards.

The fact says that in the current era is often the rise of competitions related to the world of motor racing. From these circumstances partially succeeded in influencing the motorcycle racing enthusiasts to follow the trail associated with it. As an example in wanting a high-powered vehicle that can perform a qualified performance.

---

---

Well, as we discussed this time, to make the motor more powerful as desired but pursued in an extreme way capable of gocek deep. Then what kind of ways?

---

Let's refer to the following reviews:

---

Replace CDI
Replacing the CDI motor is one of the right things to make the motor more powerful, using CDI Racing then it will change the original standard factory system into high spec.

Measure Compression
Measuring compression is very important in knowing the proper use of fuel, so the higher the compression the higher the otkan required.

Replacing the Carburetor
The next way to replace a standard carburetor is changed using a larger carburetor. Because the intake that entered the greater and the results released the greater, do not forget to set the wind on the carburetor to work optimally.

Deck Clearances
This one way should also be noted, the distance between the piston head with the cylinder block roof must match the settings. This calculation must also be through a mature measurement to avoid mimpes packing conditions that can make mendem seher thinner and prone to nonjok head.

Exhaust
Change the exhaust is the easiest way that can be done by everyone, now also various variants of racing exhaust aftermarket increasingly rampant encountered. Because the use of racing exhaust aftermarker more lighten the disposal.

Oil
Oil lubricant is a natural thing that is often noticed on the use of motorized vehicles. This time the right oil selection with racing specifications then the results given will match what is offered.

Wet Settings
This one is directly related to the carburetor, this wet setting will give a big effect when the engine position warm up. Although at the beginning feels heavy but instantly the engine is hot then the power that is sprayed more ngacir.

Wheel Gear
This time setting is more relative on vehicles that chase top speed and torque. If you want a long top speed gear can be reduced 1 or 2 steps, on the contrary to increase the gear torque can be added.

---

---