You are viewing a single comment's thread from:
RE: How to build your own GPU mining rig frame ( + stackable option for farms)
EDIT : please treat these measurements as a starting guide, this worked for me using the old style risers (pci-e x16 to 16 or pci-e x1 to 1) and was designed for 4 cards.
If you are using the new style usb risers you will have to move the middle rail forward and lower it slightly (so the usb connector sits on the rail) or move the rail back about 3cm and use right angle usb cables.
As @davebooi points out , you need to increase the size of the rig if you want to use 6 cards in this rig.
@pcste I was able to use these dimensions(with a small tweak) to build a 6 GPU mining rig using RX570's. I had to reverse the way the GPU's went in, and reduced the vertical support bars to 9.75CM which supports the riser cards. The risers are not secured, but I prefer that for easy card removal and swaps! Thanks for putting this together. It's a shame you can't edit your original post.
Thanks for your input, happy to see people using this tutorial.
yes it is a pity i can't edit.