Lighting For Everyone The STEEMIT Way

Introducing The JOULESTEEM Circuit - Post #9

This our alpha female Panda, a border collie mix. She always takes care of the pack and trains the puppies to behave. She is old and fading I am afraid……...

WE HAVE A COMPLETE CIRCUIT THAT CARRIES A BIG POTENTIAL

Lose all posts before this, never read anymore the posts after this, but this post you must surely keep. Even the tagging of this post a "introduceyourself" is a no choice decision, this is not really for me, this is about a circuit that is unique in its own arrangements that is why it needs this unique introductory post as well.

We never really know these very descriptions will save you and me one day. We have now a very versatile circuit that is born from the various joulethief mods, and since I got started on this from the joulethief offgrid forums and hopefully will finish and publish it completely on STEEMIT, then I will name this in honor of both platforms as the “JOULESTEEM CIRCUIT”.

Let me first publish this below before anythng else:

If we will observe closely, it has all the components as presented over my past posts where we modified the joulethief. As each mod came into place and verified as working, I have no choice but to assemble a circuit that will resemble a complete circuit that has the full functionalities of all mods combined. I will be very clear with my intentions for this assembly, and that is to have a single circuit that:

-Will light an LED bulb at 220 volts for a real and useful lighting in every home, no matter the location, no matter the season, no matter the time of day

-Will charge another set of batteries so that by the time the source battery is drained of its power there will be a substitution battery; if both groups (source battery and charge battery) will be continually interchanged, it will give me the ability, or at least the near-100-percent possibility that it will run for a very long time without having to use any other power source but within itself

-Will collect any static, surge, radiant, atmospheric or whatever energy that exists naturally, said energy, as long as it will collect itself up on a capacitor can be surely manipulated to do useful electrical work

-Will have the ability to expand to higher wattage loads and more capabilities by just an addition of the same circuitry; this is called the modular approach to circuit design

-Will be composed and arranged in a very simple manner, with very common electronic parts so that anybody in the world can make one for themselves anytime anywhere

We have to bear in mind as well that this circuit is only a one-transistor assembly. I can foresee that day when this science and approach will be made mainstream, and the only thing that big manufacturing companies will do is assemble a multi-transistor chip in order to increase its capabilities, exactly as how CPU chips are designed. The more internal transistors that can be packed in a given area of the mold, the more power the CPU or computer will have.

Let us examine the modules as assembled by observing the JOULESTEEM circuit below as indicated:

Let me describe in words as to the location of each module as placed in the JOULESTEEM circuit:

The lighting module is arranged in between the inductor secondary and the inductor primary, but this time it is being guided by the “bypass diode” so that the current flow is forced in only one direction, later we will discuss this current and the ultimate purpose of the bypass diode.

The charger module can be observed to be the charge battery as placed between the source battery positive and the inductor primary. The addition of the capacitor with the flywheel diode will make it possible that the said charge battery will be charged with both the impulse current (blue) and the healing current (red) so that whatever internal damages to this battery during its role as a source battery will be healed as it is being charged in the next cycle.

The main approach to collect tangible and “unexplained” voltages can be described into two stages:

The charger module as it passes the first capacitor as arranged (CAP1) will fill this capacitor up with the healing voltage as the primary inductor collapses, the CAP1 will become the first voltage source that we can describe as a “reserve power”.

The earth-cap module as arranged will collect atmospheric voltages that is collected thru the aerial antenna finding itself “going home” to the ground (or soil to be exact). A capacitor (CAP2) is deliberately placed between the transistor emitter and the ground with directional diodes to force whatever power is there to flow in only one direction. This collected voltage on the capacitor CAP2 will become the second voltage source that we can describe as another “reserve power”.

If we combine CAP1 and CAP2, arrange both in series, the combination of both voltages will surely add up to increase the voltage all the more. Real experimentations have produced voltages at CAP1 (20 volts to 45 volts) and CAP2 (120 volts to 230 volts). Let us be reminded that these voltages are produced with a source voltage of 24 volts, but the real voltage at the inductor which is the direct producer of these unknown voltages is just below 12 volts because of the voltage drop on the charge battery at 12 volts, this can be explained mathematically as : 24 volts (source voltage) minus 12 volts (charge voltage) is equal to inductor voltage.

With these simple to understand descriptions, it is my hope that many people will and can understand the potential of the JOULESTEEM circuit as presented. Let me add that I am not writing and explaining just all theories here, this is a product of theory and experimentation results, real and tangible results as I had observed, I am the first witness to these results and behaviors as presented.

VARIOUS CURRENT BEHAVIOR OF THE JOULESTEEM

Presented below is a drawing of the joulesteem with all the currents as understood, color coded for easy identification and understanding:

The very first impulse to start the circuit running is the blue current. This current charges the charge battery, energizes the inductor and powers up the transistor on its base. All these tasks, as long as the source battery is connected as source, will drain it. The indicated blue current can be further described as “always in impulses of two”, one small current to activate the transistor base followed by a much bigger current that passes thru and energizes the inductor. Each blue current operates at about a thousand times in every second, with this rate of impulses and frequency, the charge battery can be observed as increasing in voltage which can only mean that it is slowly but steadily charging.

Immediately after the blue current impulse is the red current healing current flow. Said current can be observed as having “reverse effects” as compared to the blue current. For example, the blue current will heat up the transistor but the red current will cool the transistor down. The blue current will degrade the charge battery in every charge cycle, it can even boil the water inside the charge battery due to the heat produced if left alone for a long time, so clearly the blue current slowly destroys the charge battery. The red current is again on the reverse effect, it will fill up the charge battery with charges and at the same time it cools it down. The red current also revives dead and sulfated charge batteries in a cold manner. To be brief, blue current turns everything HOT, red current turns everything COLD. Blue current slowly kills the charge battery, red current revives the charge battery (even dead and sulfated ones).

In every red current impulse, the capacitor CAP1 is always in its path charging it nicely.

The green current is observed to have come from the aerial antenna, a voltage potential that wants to go home to the ground. This green current occurs at the very moment the red current vanishes and just very slightly before the blue current starts. I have to be clear that this is just my take due to its behavior as this kind of energy is still a mystery to everyone. Anybody can give their opinions, but rest assured it will always stay as an opinion as far as this type of energy is concerned. The CERN project which is funded in the billions of dollars is still seeking for such an energy, described by great theorists as A SEA OF ENERGY THAT TRAVERSES THE WHOLE UNIVERSE.

In every green current impulse, the capacitor CAP2 is always in its path as arranged, charging the said CAP2 with another type of energy.

The magenta current is a type of current that seems to occur “immediately after” the red current and “very quickly before” the blue current. This is also a very strange current as it clearly traverses the base-collector junction of the transistor. A quick note, if we “reverse” the blocking diode in the lighting circuit loop of the magenta current, the 220 LED bulb will not light up. This clearly tells us that the current that lights up the bulb is in the direction as correctly depicted and drawn.

The voltages of CAP1 and CAP2 as combined in series to be able to do useful work. This is clearly seen in the manifestation of the second 220 volt LED bulb as it lights up during the black current cycle. It is worth noting that when the CAP1 and CAP2 are charged, it is being filled up with unknown voltage type in the atmosphere and the red current healing cycle of the inductor. But both types of energies as collected, once released thru the second LED bulb displays exactly the same behavior as the blue current impulse cycles of the source battery. This gave me the idea that the JOULESTEEM circuit is acting like a conduit, like a middleman translating communications between two realms that only it (the capacitor) can understand.

Tell me now, after reading all these, if we really are taught exactly the correct behavior of our electric universe as written in our textbooks.

I am convinced even our learned tutors are also baffled.

SO WE HAVE THE CIRCUIT, WHAT’S NEXT?

I can see that up to this point I have already explained and made clear (I really tried my best) the very operation and mysteries of the JOULESTEEM circuit. In the next posts I will start with my “walk the talk” series of posts. In these posts I will give undeniable proofs of this circuit’s operation, but since we have this STEEMIT platform now, I am planning to do it by stages.

I will post first the way as to how to perform the experimentations, the purpose, what to expect. After the descriptions series of posts, we will then proceed to experimentations, complete with results and the real setup. It is on the part of the experimentations that I am really contemplating if I will do video or pictures with timestamps only. To be very honest, as this is really my first social media platform, I do not know yet how to make a video.

Any suggestions and good ideas please, I welcome all. Thank you for even finding this post.

“The Earth Was Once Flat And All Believed; Now The Earth Is A Globe And All Believed As Well. Which Of The Two Then Is Truth?”