DIY Greenhouse irrigation – Part 3 ruining perfectly good pipe!
I've never been so excited to see a leaky pipe!
Well it's about time that I get this typed up as the DIY Greenhouse irrigation system is almost complete the only bit left to do is to wrap my head around the solar and electronics but this should be done within the next month its not quite a high priority and some minor work needs to be carried out before this takes place to keep the garden/greenhouse on schedule.
Whats has been done since Part 2
As you may have seen from the previous parts the irrigation system is built from the ridiculously cheap 21.5 solvent weld waste pipe and fittings, it does have a few downsides like lack of connector types and you have to get a little creative when trying to joining to types of pipe together.
One bit I had to improvise was end stops I wanted these to be removable and look tidy. this was accomplished with a quick 3d print and it came out great first time. dipping the pipe ends into hot water to soften the plastic and then tapping the ends home created a waterproof seal.
I'f any one wanted any of the .stl/.step files let me know and i can upload them and supply a link.
One other thing that I 3d printed for this was a jig for drilling the holes in the pipework. This allowed for precise spacing between the holes and the angles to be accurate throughout. It worked out about 20cm between holes and the 3 holes are about 30 degrees apart to give a decent coverage.
Drilling the holes had taken about 30mins or so but were by far the most tedious element to complete.
Holes drilled the pipes were refitted and glued were needed. These should be much less intrusive once the greenhouse is swamped with, well... green hahaha.
The above image was just a quick test using the watering can. It worked well enough and brought a smile to my face as we're nearing completion. Still a massive question around wether my pump will generate enough water pressure to make this whole prokect work however and its the only bit that makes me nervous. 🤔
Thanks for taking the time to read this post on my DIY greenhouse irrigation system. Please stick around and check out my many other blog posts that may interest you.
Part 1 of this blog is linked below
Part 2 is linked below
As always don't forget to upvote, resteem, follow and comment. Let me know your thoughts, what you liked, didnt or even what youd like to see as the knowledge within this community is best when shared 🙂👍
All the best
Dan
We loved your amazing content so much we featured it in a curation report to help you get more of an audience. We will be paying you for your content from the post payout. You can find the article here
https://steemit.com/helpie/@helpie/helpie-s-homesteading-curation-report-5-by-helpie-curator-llfarms
Thank you!
You got a 2.35% upvote from @postpromoter courtesy of @digitaldan!
Want to promote your posts too? Check out the Steem Bot Tracker website for more info. If you would like to support the development of @postpromoter and the bot tracker please vote for @yabapmatt for witness!
Congratulations! This post has been added to our growing directory of Steemit "how to" posts for the Homesteading/Survival/Foraging/Prepper communities. If you haven't done so already, you can claim your badge along with the code to add to your posts to let the world know you have chosen to help others Survive, Thrive and be Prepared! Click here to get the code
Very cool! :D
Cool Project! I'm a big fan of DIY automation on the homestead. Next on the list, hook that pump up to a timer and your set 😉.
People who liked this post also liked:
Bitcoin's dirty secret: Disgusting images found on the blockchain? by @cryptonomics1
My2018 - This Is My Hobby: Travel to Other Country by @caracasfrases
Ezira Hangout #1 | Ezira: State of the Network | 2018-4-1 | 1PM UTC | EZIRA prizes by @dahaz159