如何维修洗手间的木门(DIY系列)

in #cn-malaysia6 years ago (edited)


各位伙伴们好,

Good day to all of you here,

趁着昨天是周末,我和我哥商量了下,决定把洗手间那失修已久的木门,来个大翻新。

Since yesterday was weekend, I discussed with my elder brother, we decided to fix and renovate the old wooden bathroom's door.

其实,这扇木门,已经有18年的历史。它因为长期处在潮湿的情况下,能够用到今天,已经算是一大奇迹了!

Actually, this wooden door has been 18 years old. Due to the highly mostuire condition in bathroom, it's a miracle can still be used until today!

我哥他煮了一锅西红柿意大利面,咱们吃饱后,就赶紧动工了……

My brother cooked a pot of tomato spaghetti. We started the woodworking DIY immediately, once we've finished our lunch.

以下是维修木门的程序:

Below here are the procedures to fix the wooden door:

首先,得将木门拆下来(别看这扇门好像没啥重量,其实它还蛮沉甸甸的,至少有30公斤或60斤左右!)

At first, you need to disemble the door (The door is quite heavy, I bet it's around 30 kg!)

顺利拆迁后,我们先把已经腐烂掉的门框,给拔除掉(这时候惊觉,里边竟然有白蚁,这下可要费一番功夫了)

After that, we pulled out the rotten wooden plates (To our surpises, we found out there's a termite nest inside of it)



先量好那个下方已经蛀烂的尺寸,然后用这台自动锯木机,把所需要的木板尺寸给锯好。

Measure the length of the door, use the auto cutting machine to cut off the wooden plates.


再用那个Glue Gun(抱歉,中文不知道叫啥),把那些有皲裂的地方给黏糊好。

Use a glue gun to glue up those holes and cracking spots.


接着,把那些切割好的框条,用钉枪给打稳,变成一个正方形的框架。

Then, put the wooden frames and use the stapler gun to create a rectangular frame.


然后,把两片白色的PVC板给栓上去,让它们成为木门的一部分。

Put two PVC plates together and stapling them onto the wooden door.


我还得用凿子,在门边凿了三个放合页的地方,把合页给栓上去。

I need to use a chisel to make three spots, those for putting on the hinges.


最后,我们一起把门抬回洗手间,一人扶着门,一人负责在合页栓上螺丝。

Lastly, we put back the door together onto the bathroom. One of us holding the door, while another one putting all the screws into the hinges.


经过一连串的工程,终于在晚上10时左右完毕!

After a long hour, we finally get it done around 10 p.m.

(PS: 至于那个白色的PVC板,我再想着,添加一些图案,让它变得更为生动有趣~)

PS: For the white PVC boards, I might put on some decoration onto it in near future, making it more fun and attractive.

老实说,这个DIY看似很难,但是做起来却没有想象中的困难。

如果你也与我一样,享受DIY的乐趣 – 建议你们自己多动手,发挥你们的想象力吧。


Posted from my blog with SteemPress : http://raynopon.com/2018/09/03/%e5%a6%82%e4%bd%95%e7%bb%b4%e4%bf%ae%e6%b4%97%e6%89%8b%e9%97%b4%e7%9a%84%e6%9c%a8%e9%97%a8%ef%bc%88diy%e7%b3%bb%e5%88%97%ef%bc%89/

Sort:  

哗!会做一下子就好了,如果是笨手笨脚的相信要到半夜才会做完!像我这样就是笨手笨脚的!😄

天生我才必有用,听我哥说,你很厉害烹饪啊,卡姐 :)

😄!班门弄斧!让你见笑了!你和你哥才是身怀绝技呢!

卡姐真是谦虚 :D

Your post has been manually curated by elizacheng 💖

You’ve been upvoted by TeamMalaysia community. Here are trending posts by other TeamMalaysia authors at http://steemit.com/trending/teammalaysia

To support the growth of TeamMalaysia Follow our upvotes by using steemauto.com and follow trail of @myach

Vote TeamMalaysia witness bitrocker2020 using this link vote for witness

有没拍那种小智穿白色背心,汗流浃背的劳动照?放上来可以迷倒许多女生 😁

Posted using Partiko Android

可惜,没有啊,他怕惹来太多狂蜂浪蝶 :D

技术帖,给跪了

你夸奖啦,只是喜欢搞些DIY而已

太强了你们两兄弟!

呵呵,Eliza你过奖了,我只是喜欢补补钉钉而已 :D

动手达人!~好棒棒!

谢谢小兔的夸奖。这也不全是我的功劳,我老哥也有份帮忙 :D

兄弟同心,其力断金

谢谢瓜叔,你真是好人 :D

后面的图片可以调整一下,有点小。加油~
召唤巨瞎给你点赞~

好的,我放工后,会尽量上载比较大张的图片。

谢谢感恩!

装了partiko之后第一次用就是给小潘潘No.2 点赞~ 小白条面子大~

Posted using Partiko Android

哇,感谢小P的慷慨,你的第一次竟然给了我!

看来,我要去给小白条多多献殷勤了 :D

现在自己动手做的木门真的很难得,在我爸爸那个年代,很多人喜欢动手做木制品,现在很少了。真的很赞。

嗯,的确是真的,以前的老一辈,很多都是很厉害的木匠。反观现在,就很难找到~

Coin Marketplace

STEEM 0.21
TRX 0.20
JST 0.034
BTC 98477.90
ETH 3327.94
USDT 1.00
SBD 3.07