BMW E92 M3 Track/Race car Journey Article 1

in #bmw7 years ago (edited)

Hello everyone, i have viewed quite a few threads on here and thought i would test the water to see if there are any car, track or race enthusiasts or just regular people that may be interested in my Journey

I will start from the beginning and keep posting articles until we are right upto date with what is going on with the car and what i plan on achieving in it in the future... i do blow on a bit and things may get a little technical but if you have any questions i will do my best to answer and explain them.

So I obtained my Bmw E92 M3 in October 2014, It was from a BMW forecourt and from inspection it didn't look like it had ever seen a race track... this was soon to change10514599_319712334904699_5917105107132929613_n.jpg!

So the ethos as with any track (soon to be)race-car, if budget permits, is to uprate the brakes, suspension, tyres and get a good seat and harness - so this is exactly what i did...

The front brakes were changed for the AP Racing CP5555M1050BG.G8 kit (6-pot callipers and 368mm x 36mm discs instead of the larger 378s, to allow fitment of 18" wheels) with the CP6602-1001BK.G8 rear kit (4-pot calipers and 352mm x 26mm discs). Ioriginally asked for the standard Ferodo DS2500 pads (which are not suitable for track use) to be swapped out for the brilliant Pagid RS29s, but sadly there were none in stock in the UK at the time, so went with Ferodo 1.11 endurance pad and was assured they would be up to the job and as they were an endurance pad so would even last a bit longer than other pads... Naturally, being a genuine AP kit, it went on seamlessly and I couldn't wait to try them out...!10446708_350512435158022_6917651579392177488_n.jpg

Before I could test these big stoppers and knowing how good they are i knew that i would need some decent suspension, KW Suspension an aftermarket company in Germany had developed a setof 3 way adjustable Shock absorbers for this cars Big brother the GTS at the Nurburgring

10540809_302761266599806_4623549078653512284_n.jpg

So that was the suspension and brakes sorted - next the wheels and tyres. Well the design of the car allows it to run stupidly large tires all round and after a bit of reading and research, it was only ever going to go one way and a set of Gloss Black Apex Racing 10x18 ET25 were ordered for a square setup. With these on their way from America the only tyres I could guarantee for the job was a set of Michelin Pilot Sport Cups - not Cup+ I might add and certainly not the new then Cup2s, just the regular Cup 1s. Out of interest,if you want to know the Cup 2s offer grip levels only marginally better than the Supersports and the Cup+ are like a regular Cups, but have a couple of extra water lines.
So four 285/30/18 Cups were ordered, along with a set of 10mm spacers for the front to stop the wheels rubbing the KWs up the wrong way and a 5mm spacer on the rear
10255285_302767356599197_1752692619878150259_n.jpg

1012966_314280668781199_5520423094005443916_n.jpg

Only thing missing now was the Recaro SPG XL seats... Recaro had a back order and then they shut for Christmas and then racing season started ect ect, so it took over 5 months to get two red seats as anything other than black was a special order, as apparently not many people want red seats - who would of thought...

trim.png

the rear interior trim was also removed to save 130kg total with the new seats, AP racing brakes on, KWs suspension on and 285 Cups with lightweight Apex Arc-8s - time to get on track!

10984274_321535794722353_544540861657902961_n.jpg

1013628_321535638055702_5792695112001993678_n.jpg

10983422_321535664722366_2151319991711526733_n.jpg

11046636_330443630498236_5599770249394013006_o.jpg

the eagle eyes among you may see some of the track photos were without the seats as i just couldn't wait to drive the car! the seats were a massive enhancement in car feel and support once fitted.

As for the rest of the modifications the car was absolutely transformed and was faultless in its cornering ability and stopping power.

I hope you have enjoyed my first submission, in the next upload i will be talking about more modifications on the car, its journey to a full blown race car and its first trip to the "Green Hell" Nurburgring

Ben...

Sort:  

Hi. I am @greetbot - a bot that uses AI to look for newbies who write good content.
I found your post and decided to help you get noticed.
I will pay a resteeming service to resteem your post,
and I'll give you my stamp of automatic approval!
greetbot's stamp of approval

Congratulations @beyondmotorsport! You have completed some achievement on Steemit and have been rewarded with new badge(s) :

You published your First Post
You made your First Vote
You made your First Comment
You got a First Vote
Award for the number of upvotes

Click on any badge to view your own Board of Honor on SteemitBoard.
For more information about SteemitBoard, click here

If you no longer want to receive notifications, reply to this comment with the word STOP

By upvoting this notification, you can help all Steemit users. Learn how here!

Hi I just want to congratulate you. The E92 M3 is one of my facourite cars. Such a timeless design and I really love that V8... Nice mods as well! Good luck and happy tracking. :)

Btw I know the E92 quite well. My dad owned an E92 335d and Alpina B3S before. :-) Drove those cars a lot but unfortunately not on track. :(

Resteemed by @resteembot! Good Luck!
The resteem was payed by @greetbot
Curious?
The @resteembot's introduction post
Get more from @resteembot with the #resteembotsentme initiative
Check out the great posts I already resteemed.

Congratulations @beyondmotorsport! You received a personal award!

1 Year on Steemit

Click here to view your Board of Honor

Support SteemitBoard's project! Vote for its witness and get one more award!

Congratulations @beyondmotorsport! You received a personal award!

Happy Birthday! - You are on the Steem blockchain for 2 years!

You can view your badges on your Steem Board and compare to others on the Steem Ranking

Vote for @Steemitboard as a witness to get one more award and increased upvotes!

Coin Marketplace

STEEM 0.18
TRX 0.13
JST 0.029
BTC 57452.21
ETH 3016.39
USDT 1.00
SBD 2.36