Project Vehicle Update #6

in #blog6 years ago

20181231_135917.jpg
Your local friendly cab mount support, which has went off on its own and rusted itself through. Making us have to work more...

20181231_151802.jpg
I had to cut the top of the pad out and began to size and shape a piece of steel to make a new surface.

20181231_163608.jpg
Finished shaping the steel and welded it in place. Upon checking, I found the new pad sat a little uneven with the otherside.... Uh oh.

20181231_170417.jpg
I found a washer with the exact diameter hole I needed to make in the pad anyways, so I used it as a shim and a handy cutting guide. This is not how I wanted it to come out, but sometimes you have to make do with workarounds.

20181231_171834.jpg
It appears I'm not the best at welding circular beads!

I had to cut the hole out, which I don't currently have pictures of. I plan on filling the gaps on the pad so water cant collect there and prematurely rot this mount back out. I have two parts orders on the way which will enable me to get into much more interesting steps on the chassis work, stay tuned.

Sort:  

This post was upvoted and resteemed by @resteemr!
Thank you for using @resteemr.


@resteemr is a low price resteem service.
Check what @resteemr can do for you. Introduction of resteemr.

Coin Marketplace

STEEM 0.17
TRX 0.16
JST 0.028
BTC 74418.67
ETH 2589.08
USDT 1.00
SBD 2.43