You are viewing a single comment's thread from:
RE: NASA establishes that X-rays of between 65-200 keV trigger nuclear FUSION reactions - Patent published
Why does radiation appear when the LENR reaction is shutting down?
Why does radiation appear when the LENR reaction is shutting down?
One hypothesis is that if the (Charge Cluster) CCs or other active sub unit break down, there is an uncontrolled explosion leading to a wide range of beta particle energies that lead to a wide range of photon energies - effectively an EMP. This could explain
Why we saw gamma bursts when flash cooling Celani wires back in 2013 in France. It was following this that we were first contacted by EarthTech Texas who helped us get a scintillator. This year we learned that EarthTech Texas was set up by Hal Puthoff and our contact there said her father worked for two decades with Ken Shoulders on CCs.
Why during 'Signal' it appeared that the connected power monitor and unconnected Scintillator had extended dropout & saturation respectively. This matches what Ken Shoulders says can happen when a CC 'blows up'. Our best guess for the timing of 'Signal' is just after a shock, physical in terms of pressure change or electrical (which would also lead to physical and thermal).
So, if a LENR reaction is shutting down, whatever stabilises the CCs, ceases to stabilise them and that causes a burst of activity. The activity is all beta, light, x-rays and gamma assuming the CCs were not in the middle of some nuclear reorganisation that would leave a few unstable nuclei - this might lead to neutron emissions.
So the trick would be to use specific EM waves to stimulate the desired transmutations / nuclear re-organisation, light, heat and electric output without breaking down the CCs in an uncontrolled way. Shoulders, as detailed in the report commissioned late 2001, said that electron energies are released from the CC based on applied EM waves.
In this report, Bob Greenyer found that following replication of Hutchison's effect in US, several professors told him that the various effects (propulsion, teleportation, liquification, transmutation, disintegration, transparency, glowing, plasmatic effects etc.) are triggered at frequencies of light between 22 and 24cm, these are Microwave frequencies. Which just so happens to be the frequency used for remote viewing...(of which Hal Puthoff is the king and could explain spoon bending etc.) and also - quite interestingly remote viewing as used in realtime head mounted displays for RC drone use.
A last point that may be relevant, me356 is an expert with this kind of equipment - could that be why he found it easier to get the 'glowing without extra heat effect' which he notes is when excess heat also emerges.