John Hutchinson video, full transcript where he might have revealed the New Fire TRIGGERING FREQUENCIES

In January 2013, I suggested that microwaves from a standard microwave magnetron may be useful to trigger the New Fire, only to find out years later that Dr. George Egely had got there first and the MFMP will be testing one of his reactors in September. But George wasn't the first, the Russians were doing it in the 50's.

What has happened over my time volunteering for the MFMP, is that I have discovered more and more cases where microwaves appear to be triggering the New Fire, resulting in both rapid transmutation and reports of excess heat. Here is a selection, that I talked about in my Copenhagen lecture.

Figure 1: Some examples of Microwave / RF driven transmutation / LENR

In the same lecture, I describe how you need to excite your reactants, to interact with the structure of the physical vacuum, in order to pull energy out of it. I describe how this tapped energy results in the formation of charge clusters, that self organise into stable quanta, and that these charge clusters can be stored in conductive elements.

Sparks can split hydrogen molecules, generate the Rydberg state, the electrostatic field and other factors that lead to the formation of charge clusters. Here is one natural phenomenon I captured, that you will all have witnessed, that creates charge clusters according to Kenneth Shoulders.

Figure 2: Charge Cluster forming lightening over Brno, 8th July 2017

Material choice for charge cluster storage

• Conductivity leads to rate of capture of charge clusters, Silver best then Copper, Gold then Aluminium
• Nobility leads to resilience to oxidation/corrosion, Gold best, then Copper - Silver only in noble gas / hydrogen mixes
• Number of protons 77 Iridium, 78 Platinum, 79 Gold

So, if you wanted to capture the most charge clusters quickly, and you were operating in a noble gas (preferentially xenon) and hydrogen mix, then the obvious optimal choice would be Silver. If you were working in an corrosive, oxidizing atmosphere and money was not object, Gold would be at the top of the list. For a compromise between conductivity and resistance, copper is a good choice, and this is a favourite of S. Adamenko, but it is also included in the work of Francesco Celani and in Japanese research - even Rossi has been said to add it to his fuel mix.

Mixing a hydrogen splitting catalyst such as Nickel with Silver is a good combination.

Triggering charge clusters to release their energy / interact with matter

So back to the point of this blog article. Piantelli, Egely, Peery, Lakatos all have microwaves as their method for triggerring/sustaining LENR. Piantelli for instance, states since 2016 that it is his preferred method without giving a specification of the frequency. The latter three specify the use of 2.4GHz magnetrons from domestic microwaves which is a choice that has been made because of the cost and availability of them rather than for their specific frequency.

The thing about anything related to tuning, is that if it is not the resonant frequency at which an effect actually occurs, you might need a huge amount of power to create achieve the desired effect, and undesirable things might occur - sort of like cracking a nut with a sledgehammer. You might need to rely on some wave interference effect to achieve the actual triggering.

Did John Hutchinson reveal decades ago the key frequencies to trigger charge clusters?

John Hutchinson, in contrast to those mentioned above, had high powered, ex-military microwave transmitters which were tunable. My impression of his work is that he set things up and twiddled knobs until he got an effect. There does not seem to be a documented list of what frequency does what. However, a few days ago, I was talking through the possibility of this technology with someone and caught John saying this...

Some measurements at Stanford University, UCLA, Lawrence Livermore - Dr. Henry Strap, William Tiller, put it at around 22 - 24cm waveband that a lot of this activity happens at - and their tests are quite exhaustive and erm quite extensive - giving a lot of interesting results.

So I thought, what are the chances that is a microwave frequency? I used this calculator and these are the results I got:

• 22cm wavelength is 1.363GHz
• 24cm wavelength is 1.249GHz

If this is true that 22-24cm is the right wavelength then this corresponds to around double the wavelengths that derive from the 2.4GHz magnetrons used by Egely, Peery and Lakatos, could it be that with shaped reactor design and dynamic reactants, wave interference could lead to some triggerring via harmonics. Could the harmonics be created by the plasma itself?

Of course, if you were able to find a microwave frequency generator in this range, you may only need to use many orders of magnitude less energy, to trigger an effect. Well, it just so happens that you can get them - for real time remote viewing for drones.

1.3GHz transmitter SOURCE

The two channel US version corresponds to 23.83cm and 23.42cm - the international version has 9 channels:

GHz	cm
1.080	27.76
1.160	25.84
1.120	26.77
1.258	23.83
1.200	24.98
1.240	24.18
1.280	23.42
1.320	22.71
1.360	22.04

So between the two types, you have 4 frequencies in the range that Hutchinson was told was critical, 22.04, 22.71, 23.42, 23.83, with an additional outsider at 24.18 - all at 800mw

Is 800mw enough energy?

Of course, 800mw is not the 600W+ you can get out of a typical microwave magnetron, but, lets say you made a half wave scaled miniature reactor, say, just 11.02cm long for the 22.04cm wave and had a pulsed glow discharge in that. Could resonance lead to immense efficiency in the centre?

By accident or design?

Did Hutchinson knowingly make his samples a specific length or was he having to adjust the microwave frequency so that the standing wave became evident for the particular sample. I note that many of his samples failed / exploded or transmuted in the centre of the centre (or on some other standing wave basis) - this makes perfect sense if he was tuning the standing waves to be resonant for the particular sample length. Charge clusters may be formed by any resonant Microwave frequency. Once charge clusters are formed, say in the point of maximum interaction with the structure of the physical vacuum, in the centre of the sample, they would conduct out through the sample through the metal and so their potential effect would travel.

Naturally, the perfect sample would be a sphere as all waves from all angles would be more predictable, which is probably why the heaviest object ever lifted in his available video demonstrations was a cannon ball like sphere.

In Johns work, the explosions may have just been an effect of a threshold reached that caused the charge clusters to trigger and this then caused a cascade. If 22-24cm is the actual triggering frequency range, then a tuned reactor as described above, may be able to both build and trigger the effect with the minimum of input energy.

John Hutchinson Video

My transcript

I am looking at my options on immigrating again to Europe.

So things sort of drifted from that end er and also the events gave scientists time to catch up to these, astounding, fantastic effects, that are on the er video.

Here we have a collection of samples from 1979 to 1989, of metal pieces done by the Hutchison effect apparatus and we are going to start with the very first sample which gained a lot of history around the world and also in a lot of national Laboratories, which is this very large heavy steel bar.

As you can see here, the crumbling material here is off the end this bar here, and actually is a transmuted material that is unknown in the metallurgical handbooks.

This particular sample has been to Germany, in the United States national Laboratories, also in Japan and other locations and it's an extremely rare material that appears to be a major transmutation.

Now getting into another sample here we find a heavy piece of what they call extruded brass that exploded with inside itself ripping it into this pattern, ripping it apart.Very heavy dense material, this is a different time frame of about 1987/88.

Coming to this sample here of aluminium we find something wanted to get outside of the metal itself and looking at it you can see that the pressures inside of it indeed try to get out.

And going to samples that have other samples sitting on top of them, we have here a knife, that was on a sample that's got itself embedded into the sample and apparently some type of transparency did happen. This particular sample was anchored down and was given to shave off the top layer of aluminium, to get to this level. This is extrusion alloy, not cast, and if you observe very carefully, there is a shadow of the knife itself, embedded in the metal here, on the back stainless steel kitchen knife embedded in extrusion alloy.

We get two again a piece of extrusion with a piece of wood inside that came up in several samples analysed in Germany and at the National Laboratories wood mixed in with the structure itself. We're not sure exactly on this sample how much wood, could be a cubic inch or more inside here.

Going to this sample, again we find samples that look like they ripped themselves apart and rejoined as you can see in this little sample here.

And then we come to brakes that indicate actually a lot of stress, it has this nice clean cut. Looks like a bent stress, so this was broken in a fashion perhaps like that.

On the other side of the coin, we come to something that looks like it was ripped apart, or turned to jelly and ripped apart, and frozen in time and space. This is a large aluminium sample again, extrusion alloy. It was once one piece and was totally formed like this through some experiments actually seen on video.

We come to more hard material such as stainless steel that had just bent and twisted around. There's a lot of little pockmarks and pieces coming out of it, looking similar to the large piece of steel I showed in the very first sample.

This is just many, of many samples, that I do have and other people do have, that are still undergoing analysis around the world and new theories are coming out almost weekly, as to what has happened here.

In conventional physics, it would take terawatts of power to do this, there's no radio waves, or anything that can do this, there's no electro static, so in a way, the theory is, keyways made up of electromagnetic and electrostatic fields that I produce are opening the doorway into another dimension, that allows any kind of amount of energy to come in and do this, to create these effects, and it must be on the order of terawatts, because um, we've had larger samples than this fall apart, break apart and then again basically it seems to come back into a circle, the universe supplies all the energy needed for mankind and also for propulsion and an space travel.

I don't go into mathematics at all. I visualise things and always joust so to speak the conventional scientists so the scientists with the mathematics saying that intuition is a shortcut through math I visualise this put it in the best words that I can find I can actually see the atom I can see the different interactions of the dimensions inside of an atom and I can explain it in those terms, visualise it and actually do it physically, but mathematically, I am a basket case when it comes to um trying to understand mathematics and I only use maths in a limited quantity. In electricity I need mathematics electro mechanical engineering I need mathematics just basic measurements when it comes to the exotic math I'm lost so I rely on intuition which gives me a lot more to see and a lot more to do.

I believe in doing it and making it in reality instead of drawing up a lot of numbers.

There's a little bit of backbiting, but there is a lot of round the world scientist. Very high powered scientists, involved in the old Star Wars program talking a[bout] a lot of this now. They get into the psychic aspects of it, all the physics aspects of it all - a lot of their work is coming up, released err… out of Lawrence Livermore [Laboratory, USA].

Still Los Alamos is a little tight, they’re slowly loosening up, colonel Alexanders now is into remote viewing, he is the head fellow involved in non-lethal weapon technology - made an appearance on a program called encounters. Ed Danes is now out of the Enscom group, security command group and now is on sightings.

So there’s a wave of media all coming forth such as these programs showing.. what is really going on, even NBC did a special on is Remote Viewing true or false and they’ve got a positive situation in a one half hour program, ABC / NBC I believe - networks in the states.

So there is a lot of breakthrough in the media coming slowly but it is coming out more. So it will give something for people to look at and think about.

I think the mind can act as also a er… a co-hearer of frequencies and transmitter.. and unlock this doorway into space and time.

Some measurements at Stanford University, UCLA, Lawrence Livermore - Dr. Henry Strap, William Tiller, put it at around 22 - 24cm waveband that a lot of this activity happens at - and their tests are quite exhaustive and erm quite extensive - giving a lot of interesting results. At Mcdonnald Douglas they do a lot of spoon bending where they take control samples and slip them under the electron microscope to see if they were bent via force or by mind.

So Breakthroughs are being done by Mr. Jahn at Princeton University who is also connected to McDonnald Douglass- and I am not surprised if even now, they have come across a formulae on this area of physics which has to be included. Everything is connected to everything else in my opinion, Psychic, erm, hard core physics, outer fringe physics, time and space, cosmology .

---

If you want to be automatically notified as soon as a new blogpost is made, please follow. Also, please up vote and re-steem the article as it will help get exposure for the New Fire. If you are here just browsing, you really should get a steemit account, as it is the fastest way to responsive, advertising free blogging and you can earn real money by helping to build the network - you can also earn money for just commenting on another contributors blog, the secret is, write quality content and comments and then others will up vote you.