Nicehash Miner Legacy for dummies #2: Benchmark

Introduction
In the previous tutorial in this series I've explained the main interface and how to handle it as well as some tips for getting the best performance. In this tutorial we're going to take a look in the Nicehash miner legacy and how to get the best benchmark for our GPU or CPU that will result in getting the best profit from our device that have been selected. beside that we are going to take a look in Nicehash website and discover the best algorithm for our device. and because of some people is getting confused when benchamark I'm here going step by step and making the process easier to understand.

What Will I Learn?
-Benchmark GPU or CPU (only supported devices)
-Configure device benchmark manually

Why benchmark?
The benchmark tests different configurations to optimize the mining power, quick, normal and precise defines the extent of the parameters tested. So basically the more time you allow it to benchmark, the more probable it is that you will have more hashing power. And each card is different, even if it's the same model from the same manufacturer.

Requirements
Windows 10 or 8.1 or 7
RAM 4GB (at least)
GPU (AMD OR NVIDIA) Must be supported by nicehash.
Difficulty
intermediate
Device benchmark
We will getting started with Nvidia GPU first you will need to define your GPU series for example ASUS Gefore GTX 1070 (Ignore the brand) so it must be (GTX 1070).

First go to the following from your browser:
https://www.nicehash.com/profitability-calculator

Sketch.png

Select your hardware as mention in the website.
Select your country currency just to calculate the estimated profit.
Your electricity cost kilowatt hour.
After knowing the estimated profit per month you will see below the page an information about the Benchmark and the best Algorithm currently that can be used. Please be aware that this changes from time to time and not something constant.

Sketch.png

In that case 60% goes to NeoScrypt and 30% for Equihash.

Now we're going to start the benchmark after knowing the right algorithm for that device. We must get it correctly after the auto benchmark process.

Configure Benchmark Window
Open your Nicehash Miner Legacy

Select Benchmark Button
Sketch.png

Sketch.png

Benchmark Type
Quick - It will run as quickly as possible without proper performance.
Standard - Will work for medium speed to get normal performance and there is a high probability that this will be similar to the result of the Nicehash website analysis.
Precise - Will take a longer time until it gets a very stable rate then it will switch to another alogrithm. (Recommended in most cases) but standard should be fine also.
Note: if you don't want select all algorithms. at least make sure you've select all algorithms that Posted on the NiceHash website.
In this case (GTX 1070)
NeoScrypt
Equihash
Lyra2REv2
Blak2s
Then you can start the benchmark. and please make sure you've only selected that device only. or that type of cards if you've more than one card. and don't select other type from device list.

Sketch.png

In this Image we can see the most profit goes to NeoScrypt scroll and we will see Equihash after that.
If you got a lower results than Nicehash analysis. Try a different benchmark type like Precise.

How to configure Benchmark manually?
In that case you've have to edit each card config. it only recommended for advanced users.

Go to NHML-X.X.X.X Folder (X.X.X.X is your version)

Then open configs
Sketch.png

Then open benchmark_GPU-xxxxxxxxx.js (xxxxxxxxx is an ID can be different)
Sketch.png

Define Each Algorithm

for example:

  "Name": "ccminer_NeoScrypt",
  "NiceHashID": 8,
  "SecondaryNiceHashID": -1,
  "MinerBaseType": 2,
  "MinerName": "neoscrypt",
  "BenchmarkSpeed": 1036520.0,
  "SecondaryBenchmarkSpeed": 0.0,
  "ExtraLaunchParameters": "",
  "Enabled": true,
  "LessThreads": 0

BenchmarkSpeed
Benchmark Speed per MH or GH/s etc... (Each algorithm has a different measurement unit.)

SecondaryBenchmarkSpeed
Secondary is optional you can leave it zero.

Enabled
true if you want to enable and false if you want to disable this algorithm.

LessThreads
In case of CPU or GPU mining greater than 0 (1 = leave 1 thread unused, 2 = 2 leave 2 threads unused, etc.).

Note: By default the optimal number of used CPU Threads is automatically determined during benchmark.

Previous Tutorials
Nicehash Miner Legacy for dummies #1: Getting Started
All images has been taken/edited by @harugon for an open source project licensed for public usage under the terms of nicehash company.