How To Repairs Your Bed ? Check It

#Hello, #Steemian in the world, here I will show you all, how to fix a broken bed or make a bed that has long been comfortable again

• This is a pict of the bed that I am fixing on my work

it was a picture of a broken bed with two thick foams that I would stick on the bed to feel comfortable during sleep.

I will connect the two foams into one wide section, in order to cover the entire bed.
And I will stick the foam on the top of the bed with glue.
You will need a glue to connect the foam together and then stick it on the bed.

Then do it again on the other side of the bed the same way, but you can use on the other side with a foam that is not too thick, you just use thick foam for the place you will sleep, or you can also use the same thick foam if you want, but I do not use the same foam.

• This is the pict of the bed that I have attached with the foam

After all you finish
you can start to cut the fabric
you can start cutting the fabric by making the size according to the bed
the size I mean is the top, bottom and side.

• top and bottom

Top and bottom are the same size, you do not need to measure it twice, you only need to measure it once and make it into two for the top and bottom, but for the top and bottom sizes do not have the same length and width, I mean here for the size length and width, top and bottom still have the same size, if you do not understand you can leave your comment below.

• side

for the side, you just measure the width of the thickness of the bed
then you cut the fabric around the bed
you can cut the fabric to the side by connecting part by part
because if you cut the fabric to the side a long the circumference of the bed will be very long
try to cut it part by part and then you connect to be one, I hope you understand.

You can see me connecting it like this

oke, let's to the next part

• *sewing cloth

At the sewing stage
First, tie the line with the fabric, in this stage you just sew the line on the edge fabric until it surrounds the fabric
do it on the upper and lower fabric at this stage
the side will only be the end.

This is the line

i hope you know what i mean the line is at the pict

• how to sew

At this point
after you sew the line on the edge of the fabric
then put the side cloth with the top cloth
and sew the upper fabric with the side cloth into one
sewing the side cloth with the top cloth, just like sewing the line
sewing it up to surround the upper fabric
if you do not understand how to sew it, I will explain it

• how to sew the cloth

In this case
the upper fabric in the outer circumference
while the side cloth is in the inner state, then sew around on the upper fabric
I will show you the picture, try to imagine it

This is the pict when i sew it

This is the pict when i'm finish

i hope you will understand the pict wit what i tell to you

then after you have finished sewing the top with the side
do the same thing with the bottom cloth, but in sewing the bottom fabric, you do not need to sew it until it surrounds the top fabric
you just sew it 3/4 part, because you need a gap to insert the cloth to cover the entire bed

• how to insert clothe on the bed

Insert the fabric in reverse
inside to the outside
so that when you finish putting it on the outside it will look like this

In the pict, the making is almost complete

• finishing

Now it is time to finish
When you have finished putting the cloth, you just need to embroider the unsold part of the gap by hand to cover all the gaps that are not sewn
after you finish, you can use the bed to sleep comfortably again =)

completed bed pictures, same as the last picture

good luck to you
if this is useful for you, I am very glad
thank you for taking your time to read my article about how to repairs your bed

if you don't mind
appreciate this post with giving some vote =)

don't forget to follow me @razha28

thank you