A Little HELP from MUH Frens!

in #work6 years ago

A while back I made a post on The Cost of Doing Business in which I explained that my goal in Home-IN-Steading is to put a roof over my families heads and food on our table whilst simultaneously being home.

The alternative is what most of us chasing the American Dream have been living out: that is, working away from our homes in our industrial revolution driven world to provide for our loved ones via wage slavery.

It is in this striving that I found myself, once again, taking a job that was a good distance away from home. It was supposed to be a lucrative job, paying out over $3000 dollars for just a few days of work.

Key words "Supposed to be" is what I will focus on for the remainder of this post.

I knew that this easy money job was going to be difficult right after I picked up @mobilejoat from his house. My work truck started losing power, as if it wasn't getting enough diesel to the injectors. Being the knowledgeable mechanic that he is, he began to trouble shoot my ailing trucks symptoms.

MJ: When did you last change your fuel filters?

Me: Its been quite a while.

So, we limped the old truck along until we got to an O'Reilly's in Gainsville, MO. There, in the parking lot, MJ changed out my two fuel filters and the enormously large air filter. He also cleansed the Mass Air Flow sensor located within the air induction leading upto the turbo intake.

Bada-Bing, Bada-Boom!

We were up and running, the ol' girl purring like the day I bought her. We drove for about 136 miles before we stopped to fuel up. After fueling up, the truck decided to start losing power again. The automatic assumption was that somehow, adding fuel to the tank caused the filter in the tank to clog up again. The only solution was to limp our way to the nearest auto parts store in Poplar Bluff, MO and attempt to fix the in-tank filter. That's easier said than done.

In order to get to that filter, the tank must be dropped from the frame. Unfortunately for us, we had just filled up 40 gallons of diesel. So, we bought 8 five gallon buckets and a siphoning hose and began emptying the tank.

IMG_20180207_165345537.jpg

After a couple of hours, we had the tank off and were ready to fix whatever we would find in the tank.

IMG_20180207_170822461_HDR.jpg

IMG_20180207_170840623_HDR.jpg

Low and behold! We found a badly disintegrated fuel filter on the end of the tank's receiving unit. We thought for sure that this had to be the culprit. We blew air back through the line to clear it from any possibly trapped debris and reassembled the tank.

IMG_20180207_171251895.jpg

IMG_20180207_181613669.jpg

Unfortunately, no one in town had the right part that we needed to replace the filter end, so we had to engineer one out of the materials you see below.

IMG_20180207_181620855.jpg

BLUER-blue-strip-3 (1).jpg

After all that work, we found out that that wasn't the main problem after all.

We were able to limp the vehicle along until we got to our hotel in Marion, IL. After a very long, and unproductive day, we were ready to call it quits for the day.

One of my favorite sayings is:

Tomorrow's another day.

The problems of the day and the work to be done can wait until the next day. After all, they weren't going anywhere.

BLUER-blue-strip-3 (1).jpg

Here's the JOB we were hired to do. Tear down the old rotten, non-load bearing wall and rebuild it.

5166.jpeg

IMG_20180208_153036718.jpg

We got as far as you see before we were kicked off the job because of a miscommunication between the owner of the property and the maintainence company that hired us.

Unbeknownst to us or the Maintainance company, the owner of the building had grown tired of waiting for them to get someone to fix the wall and hired a contractor themselves. Meanwhile, we had already bid the job and were given the go ahead to get the job done. And so we did, at least until the other contractors showed up and saw that we were working on their job. After a rousing game of management pass-the-blame, we were told to pack up our tools and the other contractors would finish.

BLUER-blue-strip-3 (1).jpg

Oh, Well. Back to the mysterious truck ailments.

With the remaining daylight we made our way to another auto parts store and replaced the Mass Air Flow Sensor, hoping that would be the cause of the vehicles woes.

It wasn't.

BLUER-blue-strip-3 (1).jpg

IMG_20180207_212120874.jpg

IMG_20180208_173700950.jpg

IMG_20180208_174041391.jpg

While poking around under the hood @mobile-joat discovered that there were quite a few wires that had rubbed themselves raw and/or were chewed on by a mouse.

IMG_20180207_211337411.jpg

IMG_20180207_211352098.jpg

MJ deduced that the wires were shorting out as the vehicle bounced and ran down the road, causing electronic modules to either malfunction or go bad all together. So, we bought a OBDII scanner to give us a clue as to what sensors and or modules were giving us problems.

It turned out that the codes the vehicle was sending out pointed to the FICM (Fuel Injection Control Module).

So, we drove to yet another store, where they had the FICM (Fuel Injection Conrol Module) in stock.

IMG_20180208_175615027.jpg

IMG_20180212_085933045.jpg

That fancy looking motherboard is the guts of the FICM. You pretty much need to have a sterile lab to open it up and replace it. Neither of which we had as we worked to fix the truck there in the NAPA parking lot. We managed to get it in, and get it all put back together, except we ended up breaking the "Y" on the coolant reseviour and need to Jerry-Rig a solution for that as well, since the NAPA didn't have the correct part in stock to fix it right.

Jerry-Rigging and making do is what we did best on this work trip.

BLUER-blue-strip-3 (1).jpg

Bada-Bing, Bada-Boom!

The truck has been running just fine ever since. We found the real culprit as to the woes of the truck. Apparently, every time we jostled the wires around the Mass Air Flow sensor and the Air Filter, we were elievating the short and the truck would appear to run fine again for a while until the wires would short out again. A few too many shorts led to the failure of the FICM to operate properly. The fuel tank, the fuel filters and the Mass Air Flow Sensor were all needing to be replaced, but they weren't the real cause of the problem.

After it was all said and done, the COST OF DOING BUSINESS for this supposedly lucrative work trip ended up leaving me in the RED!

BLUER-blue-strip-3 (1).jpg

What lesson can be learned from this little misadventure?

For one, If you are going to take a friend with you on a job, make sure he/she is a good mechanic.

The truck's problems would have happened, regardless if I was heading to this ill-fated job or not.

Thankfully, I had a little help from muh frens to help me diagnose and fix the ailments of my usually dependable truck.

BLUER-blue-strip-3 (1).jpg

Thanks for Reading!

qs-comments-smart-remarks.gif

As Always,

BLUER-closing-3 (1).jpg

Sort:  

Somebody deserves a beer. Maybe multiple somebodies.

Wow! And gotta love that miscommunication!

Haha amazing! Some people would have their undies so in a bunch after all of this. I am glad you have some amazing perspective. God is good, and now your truck runs like a boss! Be well!

Aww shucks! Sounds like you've been through the ringer on this one, sorry to hear about it. I've had the guys at o Reilly's in Gainesville help me out with parts on several occasions.

Cost of business can be steep !!

Good advice on having a good mechanic friend on your team ;)

One of those days... At least, it was a real learning experience. What year is your truck?

2006 f350. Infamous 6.0 powerstroke. Has 404,000 miles on it now.

Nice! Have you had to install a new or rebuilt engine?

Believe it or not that truck is the 1st truck with the 6.0 L that has the original head bolts and gaskets! How on Earth it is running as well as it does is beyond me but it does.

I hope they at least paid you for the work you did do. Sometimes it is just better to stay at home. When something sounds too good to be true, it usually isn't. Sorry to hear about the problems, but at least you now have a truck in good working order, thanks to MJ!

They paid a small portion. We had 75% of the work done, but they paid us for only a quarter. Lesson learned.

A hard lesson too...

Well, you got your truck fixed, in a much more timely fashion then other cases. But, what a bunch of drama to add into that mix.

Well, write more stories on steemit. Those are always positive. Positive cash-flow.

That's another cost to doing business: not being able to write more on Steemit. I tip my hat to those who can work all day and still find the time to gather their thoughts and make a quality post.

Jerry-Rigging and making do is what we did best on this work trip.

What a wild ride, man.

It is just as well that you had a fine mechanic like mobilejoat with you.
imagine the towing, garage mechanic costs for that amount of repairs and getting to each town where they would relieve you of your cash.
Thank goodness I grew up before computer controlled everything

Do these kind of things require written contracts or are they like handshake agreements? If there was a contract and it was reneged on, would it be something not worth going to court for? The reason I ask is because for some it isn't worth slugging out in court. Just glad you got back safe and sound and that your vehicle came back in better condition than when it left.

Coin Marketplace

STEEM 0.36
TRX 0.12
JST 0.039
BTC 70181.59
ETH 3549.53
USDT 1.00
SBD 4.74