How To Cut Down A Tree Without Experiencing Any Difficulties

stevebj (52)in #tree-trimming • 7 years ago

How To Cut Down A Tree Without Experiencing Any Difficulties

Cutting down trees can be easy if you understand the concept and operation. The nature of your cutting saw is one of the most important things you should know. Ensure that safety steps are properly carried out to keep from any danger. The position or location of the tree should be monitored cutting takes place. It is a good tip that any professional will recommend before cutting a tree down.

Do you know that cutting down a tree can be a risky venture? For this reason, you should your dress prepared before beginning to fell a tree. Ensure to have steal cap boots, chainsaw chaps, helmet, ear protection and eye protection before acting.

Step 1:

The location of the tree is the first step to consider. Ensure that the area does not have pets near to a radius, power lines or structures equal to the size of the tree. Ensure that people are far from the tree before cutting. The height of tree should around two times from where people are located. This will help to secure both the operator and people.

Step 2:

The direction of felling the tree should be properly selected. In most case, the direction will be where the tree is naturally facing. In the opposite direction, ensure to prepare an escape path, to ensure that anything remains perfect. At forty-five degrees, you can comfortably fall the tree down for safety reasons. Loose branches should be removed and the area around the tree can be free of any attachments.

Image Source (direct link to img)

Step 3:

Ensure that the left shoulder should be the perfectly facing the tree. This implies that the tree should remain at your left side. On the side of the tree, ensure seventy-degrees cut come effective. It should be remembered that the direction of felling the tree goes along with the seventy-degree cut. The guide to use will always emanate from the type of saw used. The direction to fall the tree should also be in accordance to the saw operation. When carrying out this operation, ensure that the location of felling the remains monitored.

Step 4:

The saw should be turned sideways, if you want to take the next cut. For the first cut, ensure to move in a horizontal direction to create a notch. During the process, ensure the cuts are properly done.

Step 5:

Moving to the opposite direction should be your watch word when feeling a tree. Above the past cut, ensure to make a slight horizontal move. The sawing process should continue until you have been able to secure enough space. Now, go ahead to insert your wedge into the cut you have done. This will help to prevent the saw from binding. Complete the cut by simply driving the wedge in.

When carrying out this procedure, the blade should not come close to the wedge. As a hinge, it is important to leave or forgo around ten percent of the size or width. Try to keep a distance when the tree starts to fall and pave an escape route.