Electrical method of exploration

in #steemstem7 years ago

Hello friends of Steemit.

The electrical method is another method of exploration used by the oil and mining industry. This method allows to obtain the lateral and vertical variations of the resistivity, which once obtained, are mapped through the sections of resistivity that facilitate the interpretation of the composition and the stratigraphic distribution of the different layers of the subsoil.

The method consists in the injection of an electric current "I" through two electrodes A and B nailed to the surface which generates an artificial electric field. The difference in potential generated "ΔV" is measured with the electrodes M and N. See images 1 and 2.


Figure 1 - Schematic diagram of the distribution of electrodes on the surface
Source


Figure 2 - Distribution of electrodes in the work area
Source

The Resistivity is given by the Equation:

ΔV ➡ Potential Difference (V)

I ➡ Current Intensity (A)

K ➡ Geometric Factor (m)

ρ ➡ Resistivity (Ω.m)

According to the type of configuration of the device, the geometric factor "K" will be given by the functions:


Source

Images 3 and 4 show two sections of resistivity obtained in the field with different distributions of emission and detection electrodes.


Figure 3 - Resistivity section
Source


Figure 4 - Resistivity section
Source

The method of electrical resistivity has allowed locating anomalies originated by complex geological structures as well as the detection of fluids of interest.

Given the high amount of conductive materials in the subsoil, the response obtained from the application of an electric current and therefore an artificial electric field, translates into a wide range of resistivities that favor the interpretation and prediction of the composition of the medium.

References

  • De la Vega, Miguel O. “Ingeniería de puesta a tierra. Colección de textos politécnicos” Limusa –1998.
  • Ollendorf, F. Erdstroeme , (Corrientes telúricas),“Birkhauser Verlag”, basel u Stuttgart. 1969
  • ORELLANA, E. 1982,“Prospección Geoeléctrica en Corriente Continua”.2ª ed. Madrid: Paraninfo.Vol1.
  • Telford, W.M., L. P. Geldart, and R. E. Sheriff, 1990. “Applied Geophysics”(2nd Edition), Cambridge.
Sort:  

Es interesante pues, los métodos utilizados como exploración, también son utilizados en los campos de la Ingeniería Eléctrica para el estudio de la resistividad del suelo, lo cual es fundamental para el posterior diseño del sistema de puesta a tierra.

En este medio, sin embargo, el método más utilizado es el método de Wenner, ha sido muy interesante la lectura que nos traes, ya que permite conocer otros métodos. En lo personal, solo he utilizado el método Schlumberger además del Wenner. ¿Podrías hablar un poco, quizás en un posterior post, de las ventajas de cada configuración?

Saludos!

gracias por la lectura y la sugerencia. De seguro en otros post hablare de cada configuración, ademas de otras en la que los electrodos no están alineados, que a pesar de ser menos utilizadas, son igualmente interesantes

Very good your article. Congratulations.

Very good publication my friend and colleague @lorenzor. Regards!.

Coin Marketplace

STEEM 0.20
TRX 0.13
JST 0.030
BTC 65128.68
ETH 3442.23
USDT 1.00
SBD 2.52