SMOK Stick Prince eCig Kit Review
https://pipesarsenal.com/at465bl-smok-stick-prince-ecig-kit-blue-vaporizer/
SMOK Stick Prince e-Cig KitVaporizer is very easy to use,you don’t have to adjust anything, just five clicks for battery to turn on the device, one click to vape . This is not a Mechanical Mod, it has built in safety features such as like 8-second cutoff time, so if you hold down the fire button for 8 seconds, it’s going to cut off the heating. It has low circuit protection, low voltage protection, short circuit protection. The Mod has 3000 milliamp hour battery inside at the bottom. The tank on top is the TF e12 Prince . The TF e12 tank is 8ml capacity tank, it has 28 mm diameter (around one inch), but it’s still very easy to grip.The device has a micro USB port that located on the back. The LED indicator on the vaporizer is to let you know when it’s fully charged. Another LED indicator is on the prince stick button that shows you when you need to charge the mod. The only maintenance you will have to do is changing the coil on the TF e12 tank, but it’s super easy to do.SMOK Stick Prince e-Cig Kit comes with 0.17 ohm coil.
When you will get your product, the box will contain the stick 3000 milliamp, internal battery TFE 12 prince, extra 0.17 ohm coil (another one is pre-installed in your tank). This coil is suitable for the range of 30 to 70 watts, but you don’t have to worry about it as long you use this coil with the Stick Prince. Additionally box has a bag of extra o rings for the prince tanks, extra top filling piece, micro USB cable for charging, warranty information and the little prince stick guide with pretty straight forward of explaining everything. In the end of the guide you will find a little diagram that shows and names different parts of the Stick Prince. On the other side of the guide you will find all the information how to fill in the tank.
To turn on the device you have to click five times the fire button and to turn it off you have to click the fire button five times again. The TF e12 tank has bottom adjustable air flow. This tank has a top filling, on the top of the tank you will see swivel. So to fill it move the swivel to the side and pour your e-liquid bottle down in there, stick the dropper in the glass bottle and fill it up to the top. After it close the top and it locks into place there with the little button on the side.The device has a removable tip, but you will have to apply some force because it’s very tight. I think it’s a good thing that it’s so sturdy and difficult to remove. It’s a great kit if you are looking for just easy to use and you want some fantastic flavor and vapor production. Plus as the bonus it has very great tank, one of the best on the market in my opinion. If you are looking to transition to vaping though then it’s not a kit I would advise for the high vapor production and high wattage style tank. I would recommend it more for mouth to lung style tank with some higher nicotine.
