📷 Water Droplet Photography Using Arduino! 用Arduino玩水滴攝影 + 教學!steemCreated with Sketch.

in #photography7 years ago (edited)

Nerd Mode Activated
宅男的攝影模式

I've always wanted to do water droplet photography after seeing the cool images online taken by others. Today I would like to share with you my first serious attempt at water droplet photography!
自從在網路上看到許多水滴攝影的作品之後,自己也一直想來試試看。今天我就來分享我第一次認真拍水滴的一些作品及過程吧!

_MG_8380.jpg

1 s | f/11 | ISO 400

To control the water drops, I used an Arduino hooked up to a simple circuit that opens and closes a solenoid valve automatically at regular intervals.
我用了一塊Arduino配上簡單的電路去控制一顆電磁閥開關,達成自動滴水裝置。


The Code 程式

The code is very simple: set pin 13 to output mode, then toggle it on for 250 ms, then off for 1500 ms, and repeat.
程式非常簡單:設定pin 13為輸出,然後開250 ms,接著關1500 ms,重複開關。

_MG_8376.jpg

1 s | f/11 | ISO 400


The Circuit 電路



The circuit consists of an Arduino connected to a TLP250 optocoupler which is used to drive a 24-volt solenoid valve.
電路基本上是一塊Arduino連接到一顆TLP250光偶合IC來驅動一個24伏特的電磁閥。

_MG_8399.jpg

2 s | f/11 | ISO 400


The Setup 架設方式

With the electronics ready, the rest is just setting up the valve with a reservoir raised above a pan full of water used to catch the drops. A flash and reflector is placed at the pan to light the image.
電子的部分搞定後,剩下的就是把電磁閥及水槽放置在一個接水盤的上方,讓後在接水盤旁邊架設閃光燈及反光板。

setup1.jpg

setup2.jpg


_MG_8402.jpg

2 s | f/11 | ISO 400


Taking The Photo 拍照方法

I set the camera to 1~2 seconds exposure, f/11 at ISO 400. The flash is set to 1/8 power. With the lights turned on and the water dripping into the pan, I pre-focused the camera at the location of the water drop. Then I turned off the lights in the room except for a dim lamp. For each shot, I start the exposure, then I fire the flash manually when I see the water droplet hit the surface of the water in the pan. The short flash duration is what captures the images.
我將設定調成1~2秒曝光時間、f/11、ISO 400、閃光輸出1/8,厨房燈開著時把對焦設在水滴打到接水盤的位置。拍攝前先把燈關掉,留下一盞小夜燈開著。拍攝每一張照片是先按快門,然後看著接水盤,當水滴掉落時手動觸發閃光燈。照片其實是透過閃光燈短暫的一閃來捕捉一瞬間的影像。

_MG_8416.jpg

2 s | f/11 | ISO 400

_MG_8427.jpg

2 s | f/11 | ISO 400


Equipment Used / 使用攝影器材

  • Camera: Canon EOS M
  • Lens: Canon EF 100mm f/2.8
  • Flash: Canon Speedlite 430EX II
  • Software: Adobe Lightroom


Hope you enjoyed this post! I strive hard to provide quality content :)

My goal is to share with this wonderful community my passion in photography, and hopefully contribute to the awesome inspirational content on Steemit.

I read and try to respond to all comments, and welcome any photography related questions and feedback!

Sort:  

技术活,当赏!!!

謝謝!

Wow, early good job, my Friend :)

Your setup looks freaking complicated 😂 but I love your shots! Great first attempt at photographing droplets ;)

LOL yes it is kind of overkill to get a shot, it's the nerd in me ;)

Haha, I sensed it's the nerd in you :D I would rather have a friend to hold and squeeze a dropper for me 😂

I used a pot full of water to hold mine ;)

電路你都會....... 未免太強了....... XDDD

我是念電子的啊~

OMG !!!這個應該去投Science fair 嘛
很久都未在這裡看過 DIY 的電子類型的文章了!
這些文章有空出的tag 都可以 tag #steemstem 啊:D
@steemstem should see this !!!

可惜,我不知道這符不符合就沒投稿,加個 #steemstem tag先

上週尾結束>.<
遲些可能會再有啊!
這個結合了很多元素,真的太牛了

不愧是EE,我之前看人家都是買現成的,像Triggertrap那種

哈哈,我這做到一半有想過直接買現成的,但想想要花錢就打消念頭了

Cool! I used to have lots of fun with Arduino =D

Thanks, it was fun making this ;)

很有實驗精神啊

呵呵,這個project猶豫了好久

很美的瞬间,技术很过硬呀

謝謝贊賞!

I think everybody is fascinated about these pictures, but the process behind these shots must have been unknown! till now!

Thank you for introducing in this world, scinece of beauty!

Enjoy @nature.art and every color!

Be happy!

Thanks so much for the comment @nature.art :)

Coin Marketplace

STEEM 0.29
TRX 0.12
JST 0.032
BTC 63701.36
ETH 3076.90
USDT 1.00
SBD 3.81