Wilhb81's New House Renovation Part 2|智昇新家翻新计划第二步

Hi to all Steemians,

Yesterday, me and my brother went to the new house again to complete the unfinished renovation job.

Since we'd torn up more than 80% of the gypsum partition boards, we just need to tear up the remaining 20% (the part is so much easier than before)

After all the gypsum partition boards have been removed, we've started to use "Dremel rotary mini saw" to cut the light steel partition metal frames into many small pieces, so that we can easily remove all the frames from the floor and above the walls.

PS: If you check out the above video, you can see that there is many sparks flying off in all direction. For safety precaution, we need to wear goggle (better be safe then be sorry later).

Once we'd done with all the cutting process, the whole area becomes a bigger open space aka living room now!

We checked the whole house sockets and noticed one of the sockets at the living room is already broken.

Without wasting our time, we quickly open up the socket, switched the broken wires with new ones.

This part is quite easy, since we don't need to use too many forces on it (not like those gypsum partition boards tear up process that requires plenty of body energy)

Around 7p.m., we'd done with all the works and heading back to home.

Next week, we're going to perform other activities there, of course we will keep you all update about it :)

Thanks for reading folks and see ya~

---

各位亲爱的斯丁密伙伴好鸭！

昨天，我和我弟再次去了那间新屋子，继续上周还未完成的拆房工作。

由于在上周我们已拆除80％的石膏隔板，所以我们只需要拆下剩余的20％（这真的是先苦后甜的滋味）。

顺利拆除所有石膏隔板后，我们开始使用”Dremel迷你型旋转电锯”将轻钢隔板金属框架切成许多小块，以方便我们轻松地将栓在墙壁上方和地板上的所有框架拆除。

PS：如果您观看上面的视频，您会发现有切割过程中火花四溅。为了安全起见，我们需要戴上护目镜（老话一句：防范胜于治疗，有备无患）。

单调乏味的切割过程搞掂后，整个区域顿时变成了旷阔的开放式空间！

我们检查了整个房屋的插座，发现客厅的一个插座已经损坏了。

在不费九牛二虎的情况下，我们迅速打开插座，用新的电线更换那已经损坏的电线。

这部分显得比较轻而易举，毕竟我们不需要使出过多的体力（不像那些石膏隔板拆除过程，需要耗费大量体力，真的是做到汗流浃背）

大约晚上7点左右，我们完成了手头上所有工作，收拾完毕后就返回家。

下周，我们将在那里进行其他活动；当然，我们将为您提供最新的信息:)

感谢您的阅读，请大家拭目以待喔〜