To make the hoops I made so many low points around the plastic ring, so many times it is necessary to cover it very well, then I closed with a slipped point and cut the strand a bit long for that same purpose and with the help of a needle to join the hoops . </ div>

You can do all you want since it is to the customer's liking, in my case try to do it as close to the main image.

🌷𝕱𝖑𝖔𝖜𝖊𝖗 𝖇𝖚𝖙𝖙𝖔𝖓🌷

-I started with a magic hoop, and I raised 3 chains that are equivalent to the first high point and I continued with high points until I completed 12 and closed with a slipped point. Then I made a chain and a low point at the same base point, went to the next base point and made a low and a half point, went to the next base point and made a half point and a high point, followed with two points high at the same base point, and repeated for 2 times more. Then at the next base point I made a high point and a double high point, and I finish the round with a half point and a low point at the same base point, at the next point I make a low point and finish with flat points until the end of the round In the next lap I climbed with a chain and made a low point in each base point, I made 2 chains and got into the next base point with a flat stitch and so I did the same procedure 4 more times, I finish with flat stitches for close the turn.

- For the leaves of the button, I made a slipknot, I made two chains, then in the first chain that I made, I got 5 low points, and I closed that loop with a slipped point. Then I made 40 low points without closing any lap. To make the leaves I made 4 chains and return to the penultimate chain and made a flat stitch, in the next chain I made a half point and in the last chain I made a high point and to close that sheet I put in the fourth chain of base and so I repeat the process for 3 times more.

🌷𝕱𝖎𝖓𝖆𝖑 𝖘𝖈𝖔𝖗𝖊.🌷

It is my pride to show you the final result of this project, I am grateful first to God because it gave me the understanding, the wisdom to achieve what I wanted, I feel satisfied, and very happy; I hope you like it.

To the manualistas that want to carry out the project I am at your service for any question, as I said, I only got the image on the internet, so I proposed and little by little I was taking out the tulip pattern, until I was pleased that your seemed like the best. I also made a video where I explain the procedure as best I can.
They can improve it, they can do it with another type of flower, they can combine it in another way, everything is left to their imagination and creativity.

𝕍𝕚𝕕𝕖𝕠-𝕥𝕦𝕥𝕠𝕣𝕚𝕒𝕝

Until the next smile friends...

---

_{Photographic source taken from Huawei G-6 cell phone
Video source graphics taken with Sony HD camcorder
Video taken by my son Israel Ramirez}