You are viewing a single comment's thread from:
RE: [Mining Rig Build and 6 card Hash Rate] GTX 1070 Gigabyte G1 Gaming 8GB
Have you tried reducing Power Limit to ~ 70 - 80? I tend to get the same hashrates with less power consumptions. Also I noticed that setting memory too high can again lower the hash rate.
Great rig casing you built there, looks like it might even have some resell value!
The lowest these cards will go in Linux is 90 Watts per card, but I find 100 seems to be the sweet spot for most of mine. I know with full power some 1070s can get up to 37 mh/s if you have won the asic lottery.
Future rigs will be all aluminum with the Brass standoffs mounted in the aluminum which keeps the cost down to about $10-$15 per rig. Plexiglass adds about $10 additional to the cost
Oh I didn't realize this was an actual Watt rating, i thought it's percentage of the standard settings. 100W is pretty low, awesome!
With the nvidia-smi command you can limit or increase the actual watts each card uses to a fixed number.