You are viewing a single comment's thread from:
RE: Ask the Car Guy @socky June 9
Our fuel unjector is not working well(not spraying well)because something is clogged in it. How to clean it?
Our fuel unjector is not working well(not spraying well)because something is clogged in it. How to clean it?
You can use an additive to add to your fuel tank. That sometimes works. The proper way is take the injector out and flush with cleaner while triggering the injector to spray. After forward flush it is good to reverse flush. After that you need to test the spray pattern of the injector. This will require a device to trigger the injector with electrical pulses and you need an adapter to pressurize the injector with solvent. An alternative way is to find a shop that has the equipment. They can usually flow test all the injectors to see if they are close to each other. If they are evenly matched, the motor will run smoothly. If you can't find a local shop, you can find mail-in cleaning services from the web.
Yeah! We have a compressor through which we have blown air at high pressure and I think the problem further increased.Because we have no equipment to suck back.