Brew your own "Steembeer" - How to - Part 1

Hi Steemians! Last year I bought this kit to brew my own beer.

I'd like to share this experience with you step by step with an "How to".
This kit includes everything you need to brew your own beer, here is the content:

• To start, it is necessary to assemble the drain and place it on the bucket in the hole provided for this purpose.

• Then past the thermometer at the level of the drain horizontally

• It is now necessary to clean the utensils and the bucket with the intended product. Fill the bucket with hot water almost boiling and dissolve 20g of Chemipro OXI a non-toxic oxygen-based detergent.

• Add to the bucket a tablespoon and the bubbler

• Wait 5 minutes

• And drain all the bucket. Be careful it's very hot and it is preferable not to breathe the vapors.

• Let the utensils and the bucket dry and serious things can finally begin ;)

• I will make a triple blonde beer. Immerse the package in a hot water for 5 minutes. The substance will be liquefied and easier to extract.

• Add the substance into the bucket then add 1L of hot water at 65C° with one pack of fermentation sugar and mix with your spoon.

• Add 2L of cold water and let cool to 20C°
• While the mixture cooled, heat water to 25 ° and dilute the beer yeast into a glass +/- 150ml

• Add into the mix after 15 minutes

• Close the bucket with the lid and place the bubbler

• Add a little water in the bubbler this creates a stopper that prevents entry of dirt. It is necessary to leave the bucket in a place at constant temperature, I chose to place it in my little wine cellar.

• It must be fermented 14 days it also depends on the temperature. The fermentation is completed when the gas bubbles no longer rise in the bubbler.

• If you want to brew your own beer to clik on this link ;) Brewferm

I tell you "see you in two weeks" for the continuation of this tutorial ;) Bottling of the first SteemBeer

If you like my post please, upvote and follow @pickoum