Outdoor Kitchen Build - Part 2 - Kingpost Installation & Construction Video #2 🎥
Welcome back to Part 2 of the Outdoor Kitchen Build! Part 1 is available if you missed it.
🏰 Kingposts 🏰
Kingposts are the smaller vertical posts that make up part of the trusses of the outdoor kitchen. There are a total of three kingposts in the outdoor kitchen.
I cut them from 6x6 timbers and notched them to have a long tenon on the bottom.
I then took each kingpost up and fit it into place to mark the final length.
I left 3 inches to stick beyond the 2x8s and chamfered the ends with my hand plane to give it more of a hand-worked look.
The tenons slide between the two horizontal 2x8s and bolt into place with four 1/2" x 7" galvanized hex bolts, washers and lock nuts.
For the time being, I left the tops of the kingposts untouched. I will cut them to match the angles of the rafters when they are put in place.
🚧 Construction Video #2 🚧
That's it for Part 2, see you on Part 3... The Rafters!
Hit me up on the comments below, I'm here to answer any questions you have! Also upvote and resteem. Thanks!
@greenacrehome
Having an outdoor kitchen is one of my dreams! Excited to see how it will turn out :)
Mine too! I'm especially excited to be able to can food outside and not heat up the house! Thanks!
is this a weekend project ? it's looking good so far thanks for sharing
Not unless you're Superman. :-) This is more of a "weekends" project. Thanks!
Thank you for the great article! This post has been featured in this week's issue of the Weekly Homesteading Newsletter!
Part 3 is out and Part 4 will be out this afternoon, just to let you know. :)
Awesome! Would it be alright for me to include the article in the next issue of the Weekly Homestead Newsletter? I am asking for permission from now on before doing so because I feel it would be inappropriate to do otherwise :) So please let me know!
Awesome!!! Thank you!