Hi everyone, here with me again another tutorial on how to cut and sew Ball gown for our kids especially this period of December for their party.

MEASUREMENT

Length	22
Half length	8
Bust	19
Waist	21
Neck	2

MATERIALS NEEDED FOR BALL GOWN

Hard net

Bell bridal

Poinsh lining

Soft net

This particular dress does not need much Measurement.

FIRST STEP

After taking accurate measurement from my client, I used 5yard of nets, one yard of bridal, one yard of lining and one yard of hard net.
I arranged the soft net probably and cut it straight. I folded the hard net and cut it straight too. I also cut the lining and bridal straight.

SECOND STEP

Now I want to show you how to cut the upper part of the dress 👗 using Ankara material.

I folded my material into two and mark my bust and waist connected it and cut it off.
I placed the front pattern to the remaining material and add two inches for zip allowance and cut it off.

THIRD STEP

After cutting everything I first of all run thread on the soft net from the beginning of the material to the end of the material to gather it together. I also run gardiase on the bridal as well as lining and hard net.


I sew the upper part and turn it with lining and mark my measurements for shaping.

After that I opened the zip side and begins to joined the soft net first.

The next material I will joint is bridal. Then I turned it with lining and hard net and fixed my zip and trimmed out the surplus.

HOW TO ACHIEVE THE BOTTOMS PART

I cut 3"of another soft net run thread and gather it, I later attached on the gown before plaiting my gardiase

This method is simple to follow and comfortably ask questions at where you don't understand.

Thank you very much for always reading my post

SPECIAL REGARDS:

@steemskillshare

@milakz

@papi.mati

@daytona475