Good evening everyone welcome to my another tutoria, today I will be showing you on how to cut and sew a beautiful straight gown I know most of you have challenges in this , let get started.

shoulder	16
shoulder bust	10
under bust waist	14
half length	16
half length waist	36
bust	40
hips	45
gown length	46
selves length	9
round selves	15

This is the material

This is the linning

I folded the material into two then mark the gown measurement, mark the hip point and mark the half length, then I took the half length waist measurement at were I mark half length, then took the hip measurement at were I mark hip point then I minute 5 inchies from the hip and have the knee measurement after that I cut it out

The back

I folded the material into two then places the front on top of the material, then I put two inches allowance for zip

The next thing is to cut the upper side, I folded the material into two then mark the shoulder, mark the bust point, mark the half length, mark the under bust , after that I took the bust measurement at were I mark the bust point , then took the under bust waist measurement at were I mark under bust, then took the bust measurement at were I mark bust point , then I took half length waist measurement at were I mark half length then connect it together and cut it out

The sewing begins

I first of all join the down part, I join the back together then I use a pin and pin the front and back together, then shape it on her measurement

The next thing is to join the front , I joined the front together then put invisible zip at the middle

Then I shape it on her measurement, after that I join it with the down part, then I cut a flare and fixed it as a selvees

The next thing is to use a fine striming and design it

I use the strimming and design it in the half length, this is the finishing result

Is beautiful right! Thanks for going through my post, please if you have any questions please drop it in the comments section