🏠🏠🏠Steem Women Club Community Contest #15 || Homemade Cardboard house crafts || by @tasonya

Hello friends

How are you all? Hope you are well. I'm fine too. I will share a new kind of thing with you today. I like any crafts. I always try to make some craft myself. I try to make different types of crafts with some materials at home. Today I build a house with cardboard. Today I am sharing with you in this community how I made this cardboard rental.

The materials used to make this car are named below:

Ingredients:

• Cardboard
• Glue gun
• Sharp blade
• Scale
• White board
• Stick
• Scissors
• pen

The details and pictures of how I made this cardboard are given below:

How to make:

First I took an old cardboard box from home. Then I opened all the parts of this box.

Then I have a measurement of the house I will build. I will measure it according to the scale and cut it with a pen.

Below is a list of the measurements by which I cut the cardboard :

Cut 10 pieces 6 cm long and 2 cm on the side

Then you have to take two squares around 20 cm. It should be cut 11 cm on both sides along the middle.

In one of these two, the doctor should take 8 cm long along the middle and 4 cm in the side.
Then draw 5 cm long spots on both sides and 4 cm spots on the sides.
The doctor should take it 2 cm long on the top and 4 cm on the side. Then the stain should be cut and followed.

Then make a cut like a square around 20 cm. One side of it should be cut into 5 cm 1 corner.

Then take two lengths of 12 cm for each side and 6 cm for each side.

Later you have to cut two 12 cm around to give the tin.

To give the ladder, it is necessary to cut 6 cm in length and 1.5 cm on the side. And two cuts 5 cm long for the bottom and top and two and a half cm for the sides.

Then cut the length 12 cm in length and 2 cm in the side.

And cut three into 8 cm in length and half a cm on the side.

For the roof of the verandah, one should be cut 15 cm in length and 12 cm in the side.

Here's how to put one together for use with your cut boards:

After cutting according to all the measurements, first cut into 10 pieces and put a song in one of them. In this way you have to put five pairs.

Then they have to be attached to the village under the corner cut board.

Then you have to put two boards cut on the same side at the same site. There are doors and windows in one of them and it should be installed outside without doors and windows.

The next two pieces of straight cut should be attached with two gum.

Then apply two pairs of gum on the upper part of the tin and put two pairs one by one.

Then to make a ladder, I will attach equal pieces to the cut part by bending it on both sides. Then you have to put all the thinly cut boards one on top of the other in this way. Once the stairs are made, the stairs should be placed at the bottom of the site in the room.

Then the boards cut long on both sides of the verandah should be attached to the village on both sides. I will put the cut ones on the bottom of these. Then I will put the cut sticks in them.

Then I will put gum on both sides of the roof above the verandah.

Then the cardboard house I made will be made.

Thanks to @steemwomenclub To give me the opportunity to share my crafts on such a platform.

Thanks to everyone who supports me