Steem Women Club Community Contest #8 ' Handicrafts ' Time to Show Ingenuity || DIY ||Rosary Type Necklace/ Collar tipo rosario
Materials to make the Rosary Necklace
• Scissors
• 1 8 ”rounded curved tweezers
• 1½ meters of silver or gold metallic thread, thin
• 53 round 8mm faceted glass beads
• 7 8mm round transparent faceted glass beads
• 108 miniature silver or gold Czech glass beads
• 1 20 x 30 gold cross pendant of the metal of your choice
• 1 golden cruiser (medal with three handles) to join the 12 x 8mm necklace
• 1 ring in gold or metal of your choice
• 1 Golden clasp or latch
• 4 gold rivets or staples
• 2 x 6mm gold plastic beads
• 6 4mm gold plastic beads
Note: You can use the size of the smallest glass bead, if you wish, like the clasp, and the gold plastic beads, you can also use laminated gold, for the pieces that are metal.
Elaboration of the Rosary type Colar
Step by Step
Engage the metallic thread with the cruiser or medal with three handles that will allow us to join the necklace, then insert a 1 rivet or staple and press with the clamp to make it firm, and thus begin to place the beads.
We start by inserting 2 Czech glass beads, 1 4mm gold plastic bead, then 2 Czech glass beads, 1 4mm gold plastic bead, 2 Czech glass beads, 1 6mm gold plastic bead, plus 1 Czech crystal
Next we place 10 yellow faceted glass beads, inserting one by one, placing between each one of them, 1 Czech crystal.
Then we insert 3 Czech crystals, 1 faceted clear crystal and 3 Czech crystals to separate each series of 10 beads.
Next, the same account setting process is continued, four more times, to complete the 50 accounts.
To finish the first part of the necklace, we do the same operation that we did in the 2nd step, but in reverse. We insert 1 6mm gold plastic bead, 2 Czech crystals, 1 4mm gold bead, 2 Czech crystals, 1 4mm gold bead, and 2 Czech crystals.
To close the collar we place 1 rivet or staple and press with the clamp to close it, then we use the scissors to cut the remaining thread.
We use the clamp to open the ring and place it on the handle of the medal and insert the clasp
We continue with the second part, which is what refers to the rosary. Here we are going to use 16 cm of metallic wire, 3 faceted glass beads, 2 gold plastic beads, 10 Czech crystals, 2 8mm transparent faceted crystals, 2 rivets or staples and the Cross charm.
We insert the thread in the ring of the cross and place 1 rivet or staple, to hold the thread so that it is firm.
We begin to insert, 1 Czech crystal, 1 gold plastic bead, 2 Czech crystal, 1 transparent faceted crystal, 1 Czech crystal, then 3 yellow faceted crystals are inserted separated by 1 Czech crystal, we finish with a Czech crystal, a crystal transparent, 2 Czech crystals, 1 plastic bead Gold and 1 Czech crystal.
This is the last step, we insert the thread through the handle of the cruiser or medal, place the rivet or staple and press with the pliers to make it firm, cut the remaining thread with the scissors and that's it.
The Final Art
Spanish
Hola amigas de la comunidad de @Steemwomenclub, me alegra estar presente en este nuevo concurso. Hoy les mostrare como elaborar un collar tipo rosario con cuentas de cristal facetado. Me encanta la bisutería, es algo que disfruto mucho y me permite activar mi creatividad. A lo largo de muchos años he elaborado diferentes prendas de bisutería para mi negocio. Hace aproximadamente un año, hacía estos Collares de diferentes tipos de cuarzos tales como; turquesa, cuarzo cristal, ónix, lluvia de oro, etc. Así que aquí les muestro una de mis creaciones y la manera de elaborarlo. Espero les guste y motive a otras chicas en esta comunidad a hacerlo también.
Materiales para hacer el Collar tipo Rosario
• Tijera
• 1 pinza curva redondeada 8”
• 1 metro y ½ de hilo metálico plateado o dorado, delgado
• 53 cuentas de cristal facetado redondo de 8mm
• 7 cuentas de cristal facetado transparentes redondo de 8mm
• 108 cuentas de cristal checo plateado o dorado miniatura
• 1 Dije de cruz dorado de 20 x 30 del metal de tu elección
• 1 crucero dorado (medalla de tres asas) para unir el collar de 12 x 8mm
• 1 aro de dorado o del metal de tu elección
• 1 Broche o Trancadero dorado
• 4 remaches o grapas dorados
• 2 cuentas de plástico doradas de 6mm
• 6 cuentas de plástico doradas de 4mm
Nota: Puede usar el tamaño de la cuenta de cristal más pequeño, si así lo desea, al igual que el broche, y las cuentas plásticas doradas, también puede utilizar oro laminado, para las piezas que son de metal.
Elaboración del Colar tipo Rosarior
Paso a paso
Engarzar el hilo metálico con el crucero o medalla de tres asas que nos va a permitir unir el collar, luego insertar un 1 remache o grapa y presiona con la pinza para que quede firme, y así comenzar a colocar las cuentas.
Comenzamos insertando 2 cuentas de cristal checo, 1 cuenta de plástico doradas de 4mm, seguidamente 2 cuentas de cristal checo, 1 cuenta de plástico dorada de 4mm, 2 cuentas de cristal checo, 1 cuenta de plástico dorada de 6mm, más 1 cristal checo
Seguidamente colocamos 10 cuentas de cristal facetado amarillo, insertando una a una, colocando entre cada una de ellas, 1 cristal checo.
Luego insertamos 3 cristales checos, 1 cristal transparente facetado y 3 cristales checos para separar cada serie de 10 cuentas.
Seguidamente se continúa el mismo proceso de engarce de cuentas, cuatro veces más, para completar las 50 cuentas
Para finalizar la primera parte del collar hacemos la misma operación que realizamos en el 2do paso, pero a la inversa. Insertamos 1 cuenta plástica dorada de 6mm, 2 cristales checos, 1 cuenta dorada de 4mm, 2 cristales checos, 1 cuenta de dorada de 4mm, y 2 cristales checos.
Para cerrar el collar colocamos 1 remache o grapa y hacemos presión con la pinza para cerrarlo, luego utilizamos la tijera para cortar el hilo restante.
Utilizamos la pinza para abrir el aro y colocarlo en el asa de la medalla e insertamos el broche
Continuamos con la segunda parte, que es lo que hace referencia al rosario. Aquí vamos a utilizar 16 cm de hilo metalizado, 3 cuentas de cristal facetado, 2 cuentas de plástico dorado, 10 cristales checos, 2 cristales facetados transparentes 8mm, 2 remaches o grapas y el dije de Cruz.
Insertamos el hilo en el arito de la cruz y colocamos 1 remache o grapa, para sujetar el hilo de manera que quede firme.
comenzamos a insertar, 1 cristal checo, 1 cuenta de plástico dorada, 2 cristal checo, 1 Cristal facetado trasparente, 1 cristal checo, seguidamente se insertan 3 cristales facetados amarillos separados por 1 cristal checo, finalizamos con un cristal checo, un cristal transparente, 2 cristales checos, 1 cuenta de plástico dorada y 1 cristal checo.
Este el último paso, insertamos el hilo por el asa del crucero o medalla, colocamos el remache o grapa y presionamos con la pinza para que quede firme, cortamos el hilo restante con la tijera y listo.
El Arte Final
I appreciate the valuable support to the curators @steemcurator01 and @steemcurator02 @steemcurator05,
@booming01, @booming02
All the content shared in this publication and the images are my authorship
Camera: Blu G6
by: @mirla33
hi @mirla33 I have confirmed your contest entry. rosary is very famous in our country. And the necklace is very stylish for daily wear. You tried very hard and it was very nice. As women, we can do any job. I was happy that you wrote in detail. Thank you very much for participating in the contest. Our motto is we are strong together. Keep making quality posts in the community. Good luck :)
Hello @steemwomensclub, thank you for your valuable comment and for your
appreciation I'm glad to be participating in this contest and in this beautiful community. Thanks for your good wishes. Greetings.
You have a very nice rosary, the combination is pleasing to the eye, very beautiful. Greetings
Hello @yolimarag thank you for your comment, I appreciate it a lot.