Aceh Fishing Boat Construction [Part 4]

photoaceh (51)in WORLD OF XPILAR • 3 years ago

Hello stemian friends wherever you are!

Today I will share about the development of making Aceh fishing boats part 4.

At this time the fishing boat is in the stage of forming the body of the ship with erect tusks. This has been seen to form especially professional craftsmen making wooden malls for molds, so that a complete picture of the shape is seen.

^{pic original}

This development is already nearing completion and in my opinion this is a fast development. Usually, the builders continue to focus on making the body with boards, but this time it's different they first raise the upright tusks and the results are very significant.

^{pic original}

I predict it won't be long before this ship will be ready. But if the materials run out it will be an obstacle to get ready quickly.

^{pic original}

Usually, what often becomes an obstacle in the supply of materials is the type of ivory wood and Boh Pisang wood because the first two woods are increasingly rare and the second is very difficult to get them out of the forest because the Boh Pisang wood has to be about 23 meters long or it can be long. 12 meters.

^{pic original}

Usually if ivory wood is found in small forest areas or forest hills close to people's plantations, but if Boh Pisang wood can only be found in mountain forests, then during the rainy season, this type of wood is very difficult to bring down. Moreover, the terrain is very steep and dangerous coupled with poor road access. So this type of wood is expensive.

^{pic original}

For ivory wood, the hardest thing is the shape of the wood needed, because if the tree has a shape that doesn't match the curve then the wood cannot be installed to make ivory. In addition, this wood is so rare that wood geeks can no longer get trees near people's plantations. Thus, this is one of the causes of delays in the construction of fishing boats.

^{pic original}

Below is a picture of the board that will be installed for the manufacture of the ship's body, I saw it, the supply of this board is also starting to run out but the board is one of the materials that is rather easy to get because it is widely available in wood factories But, this ship has enough karan wooden planks, there is still stock in storage.

^{pic original}