---My DIY Handmade Cement Flower Pot---

Good day to all steemians,this is my handmade cement flower pot.

This are the materials that we are using to make this cement flower pot:
Cement
Pine sand
Molder (inner)
Molder (outer)

Procedure:
Step 1.Mixed the sand and cement,the ratio is 1:3, one cement and 3 sand,its up to you if you are using kilogram or whatever,the important is your mixing is 1:3. And then add water,not to much,half of a bucket,then mixed it will.

Step 2. After mixing the sand and cement,get the outer molder and then pud a small amount of cement into the outer molder,1 inch the thickness of the cement,from bottom up,it make a foundation of the cement pot,then poke it to make the foundation strong. After that,put a hole in the foundation,for water drainage.

Step 3. Put the inner molder,make it sure that the inner molder is full of sand,because if it empty the inner molder is moving,that's the reason your cement pot will crashed,that is the purpose why the inner molder must have a full of sand. And then put a mixing cement and sand the empty space between the outer and inner molder then poke it until it reach the level of outer molder,then push the mixing cement,with a things that have a flat surface,mine i used old knife,so that it became plain.then slowly removed the inner molder.

This is now the look of the flower cement pot without paint.

If want to put color or paint,you can choose any color or design you want.

God bless to all steemians, stay safe always..

TO GOD BE ALL THE GLORY