I wrote the STEEMIT through engineering drawing || Club5050 || 20% beneficiaries for steemitphcurator || by- @mmratulahmed.

Hello I am @mmratulahmed, Today I am going to participate in Steemit Philippines Community's Contest of the Week: Write STEEMIT On Anything. Many of you know that I am an engineer. One of the subjects I studied while studying engineering was called Engineering Drawing. After a long time I remembered the subject of that engineering drawing. Because there was one thing in it that is to write the name beautifully with letters. So I thought I could write Steemit's name through those eight of engineering drawings to participate in this contest.

That's the decent thing to do, and it should end there. Today I will give you a gift by writing Steemit in an engineering drawing. And I'll share with you how I did this drawing.

Now I am going to start my engineering drawing and show you how I did the engineering drawing.

Step 01

First you have to take a four size paper. Along with this a little boy has to take a big axle and a pencil.

Step 02

The scale should be taken with a mark of 1 cm in succession.

Step 03

After marking 1 cm consecutively, the line should be cut with a long pull from right to left.

Step 04

Similarly cut the line from top to bottom 1 cm in a row.

Step 05

After cutting the line from right to left and from top to bottom, the paper will look a bit like this.

Step 06

Once the stain is completely cut, then you have to start writing according to the size of the engineering drawing according to the stain.

Step 07

Since the text is a little bit bigger, we are tilting the page. Complete drawing should be done with pencil and according to the size of engineering drawing.

Our engineering drawing is ready. I hope all of you like engineering drawing.

Thank you all for looking at my engineering drawing and staying with me for so long.