Good evening to you all my beautiful women welcome to today tutorial, today I will be showing you how to cut and sew closet straight gown

measurement

shoulder	16
shoulder bust	10
shoulder under bust	14
bust	40
under bust waist	33
half length	17
Half length waist	36
gown length	57
selves length	14
round selves	16

This is the material

I folded the material into two I marked the hip point, waist line and knee line . Then I took the waist measurement at were I mark waist line, her waist measurement is 36 so i mark 36 and add 2 inches allowance, next is to took hip measurement, her hip measurement is 43 so I took 43 inches and add 2 inches for sewing allowance then I Minnors 5 inches from the hip point and have her knee measurement which is 38 so I mark 38 inches and add 2 inches for sewing allowance then I connect it together and cut it out, the next thing is to cut the lases material and design it one side, from the middle to the side as you can see in the picture below

the back

I folded the material into two then I places the back on top of the material , then I marked two inches for zip allowance from waist to the length then I cut it out, after that I use the lases material and design it from waist to the gown length

the front

I folded the material into two I marked bust point, under bust and half length, then I took the bust measurement at were I marked bust point then I took the under bust measurement at were I mark under bust waist, her under bust is 36 so I marked ,36 inchies then I add 2 inches allowance then I took half measurement her half length measurement is 37 so I mark 37 inches and add 2 inches for sewing allowance then I connect it together and cut it out

The next thing is to join the middle together, I sew a straight stitches then fixed the breastcup

The I cut the extension, I folded the lease material into two I mark the shoulder, then I drop it by 5 and add 2 inches for sewing allowance then I cut it out

Then I join it on the dress

The back

the selves

I folded the velvet material into then mark the round selves and selves length then I cut the selves then I use a lases material to design the middle selves then I sew it straight

Then I fixed it in the dress, this is the finish result

Thanks so much for going through my post

My link to my Achievements 1 post
https://steemit.com/hive-172186/@esthyfashion/achievement-1-my-introduction-post-to-steemit-mentorship-by-cryptokannon