MY physical model of a 3 bedroom bungalow by @tonymoltana1

in SteemAlive3 years ago

Good day lovely steemians,

It has been a while, i hope you are all good?

First, i want to thank God for his preservation, i have been offline for a while now due to some challenges. But am back stronger now.
I want to take you guys through the model i completed today, though i started since last week but was able to keep some photographs that will entice you all.

IMG_20210705_135929_7.jpg

Completed

CONSTRUCTION PROCESS
First i went to gather up some materials for the model from a nearby shop, the materials i used include;

  • UHU gum
  • Top bond
  • Straw board
  • Embose paper (gray, ash and white colour)
  • Brick wall
  • Green area
  • Trees
  • Cars
  • White films
  • Gate and fence
  • Black embose for roof
    And a plywood as a basement for the model

Firstly, i started by cutting out the shape of the plan on a straw board, then measure a height of 3metre for my building and then cut my embosed papers as wall, the brick papers are below, ash and gray at the middle and above respectively.
Also i use the white embose as the wall skettings round the building.. The window are naturally constructed using white films.

IMG_20210702_135341.jpg
Modelling of the wall

The roof was a tough one for me because i had to be very careful and also make the roof a unique one because the roof is the cap to the building, it need to be oustanding.. I cut the black embose into smaller pieces and arranged them horizontally, placing them to lap on each other to archieve a step tile roofing.

IMG_20210630_114933.jpg

IMG_20210705_135912_4.jpg

After the model of the house, i mounted it on a plywood and added the site enhancement features to it including the fence.

IMG_20210705_135949_0.jpg

IMG_20210705_140010_2.jpg

I hope you love the job.
Warm regards, i love you all.

Cc:
@whitestallion
@bright-obias
@cryptokannon
@mato445
@raise-me-up

Coin Marketplace

STEEM 0.17
TRX 0.13
JST 0.030
BTC 56523.53
ETH 2982.54
USDT 1.00
SBD 2.15