Incredible repair project (Part 2)

in GEMS4 years ago

Welcome to a new post, greetings to my beloved gem community. this time i will show you the second part of the project

IMG_20200521_083503.jpg

If you are new here and don't know what this post is about let me tell you what you will see below will be about the culmination of a car repair and paint project

He indicated that this is the second part. If you haven't seen how it all started, you can do so by clicking here below

Part 1

First of all, we must say that we start by applying the first coat of paint to the vehicle

IMG_20200520_123759.jpg

We are lucky that the tone of the "primer" and the tone of the car are very similar

IMG_20200521_083445.jpg

So we won't need too much effort to cover the paint

IMG_20200521_083437.jpg

In our case, we cover the Background first, and then if we apply paint to the entire piece to equalize the tone

After several coats of paint, the pieces are completely covered

IMG_20200521_092912.jpg

And of course the tone of the painting is the same

IMG_20200521_092916.jpg

Up to this point the car looks pretty good

IMG_20200521_092936.jpg

We are now ready to apply the product that gives shine to the paint

IMG_20200521_092919.jpg

I hope you have not forgotten that this is a team effort, and that we also have to paint the front bumper

IMG_20200521_093036.jpg

Now it is time to apply the varnish, to give shine to the paint. Here's my partner doing just that process

IMG_20200521_094155.jpg

This product also serves as a protective coating for paint when it is already dry

IMG_20200521_094153.jpg

This process takes approximately 20 minutes, because it must be done very calmly, since the paint finish depends on this

Every effort pays off. This is the end result of the painting process

IMG_20200521_101207.jpg

Now it does look amazing

IMG_20200521_101217.jpg

Now the bumper looks amazing

IMG_20200527_145643.jpg

Now we just have to let the varnish dry for more than 15 hours

IMG_20200521_101307.jpg

After that it was time to take out all the paper to assemble the bumper in the car. Because the pieces are already completely dry

IMG_20200522_085519.jpg

In this way we continue, being very careful not to scratch anything

IMG_20200522_090834.jpg

Now it's time to take out the components of the damaged headlight, to put them in the new

IMG_20200522_091251.jpg

We finished putting together the front. And this is how it looks in one piece

IMG_20200522_093906.jpg

IMG_20200522_093917.jpg

At this point, our team completed the entire project

IMG_20200522_094041.jpg

Now we just have to wash and clean the whole car to deliver it impeccable

IMG_20200527_161417.jpg

Now it is ready for delivery

IMG_20200527_161705.jpg

Thank you very much for getting here. and many thanks to @upmewhale for keeping my beloved gem community active

All the images that I show here were taken by me, I am the author

Coin Marketplace

STEEM 0.19
TRX 0.15
JST 0.029
BTC 63878.47
ETH 2625.83
USDT 1.00
SBD 2.79