Cutting and sewing of a table maxi.
Assalamu Alaikum Wa Rahmatullah Everyone
Assalamu Alaikum Wa Rahmatullah Everyone
Hello steemian friends
How are you all? Surely you are doing well in the reign of Almighty Allah 🤗
Alhamdulillah I am also fine. I always post photography among my friends. But today I have come up with a different kind of post. Today I am going to show a maxi cutting and stitching. This maxi is called table maxi.
The things I will need to make this maxi are:
Fabric-3.50 yards
chalk
Scissors
ribbon
steps
In the 1st step, I took my necessary things in one place.
Step 2
In this step, I cut the sleeve fabric and folded the whole fabric into four folds with Jhul = 53"+4".
Step 3
After folding the fabric into four folds I marked 5" from the open side of the fabric and measured the armpit 7". Then I took the putt 4". And took the rest of the fabric to give the cut. And the neck dip took 5". I cut with scissors according to the marked marks.
Step 4
In this step, I cut the maxi sleeves to measure 17"+1" and the cuff measures 11".
Step 5
In step 6, I cut 4 ribbons at 2" for the neck of the maxi.
Step 6
At this stage I came to the machine and first sewed the neckband fabric.
Step 7
With this step, cut 5" of elastic to put inside the ribbon.
Step 8
In this step, with the help of a pin, the elastic is folded into two pieces.
Step 9
In the 10th step, I sewed the shoulders of the two sides of the maxi together.
Step 10
In this step, I sewed the bottom hem of the maxi and sewed the sleeves to the body.
I also cut and sewed my maxi. I hope you like my blog today.
Thanks alot for reading .
Good luck to you.
Good luck to you.
Best regards
Rumana Afroz
Rumana Afroz
https://x.com/RumanaAfro73363/status/1785149037110505702