You are viewing a single comment's thread from:

RE: OPPiecesPieceMakingAndCorrespondencePlayContest

in CEO Champion's Gate4 years ago (edited)

Participants post your official champions and King as an aswer to this comment.

Write, which CEO pieces will represent your piece in the tournament, you might decide that by an easy usable move set, by the champion cost or by flavor. This choice is free and can be arbitrary.
Also write how much copies of each champion you will use.

Sort:  

King

represented by Phalanx:
PieceMaker-ShieldedKing.png

Champions

1 copy represented by Dragon+:
PieceMaker-GrandHalfDragon.png

1 copy
represented by Knight+++:
PieceMaker-WeirdLancedKnight.png
1 copy
represented by Queen
PieceMaker-Baroness.png
2 copies
represented by Harpy
PieceMaker-HawkScout.png
2 copies
represented by Behemoth+++
PieceMaker-Trident.jpg

I will be using a stealth king, 2 wardens, 2 piercers, 2 cutters, and 1 back slicer
my king will be represented by the king, my wardens will be represented by Fortress++, my cutters will be represented by Archbishop, my piercers will be represented by Knight++, and my back slicer will be represented by a gluttony which will be fed an archbishop and a fortress before the game begins
OPChampions.png

 4 years ago (edited)

You have to clarify the pathes on Warden,Piercer and Cutter. Back Slicer uses 4 illegal pathes (the ones which have anchors on two sides) and two Move only squares, which don't work. Also notice, if the costs are correct, you can't use 4 pieces of the same cost.

 4 years ago (edited)

The paths are declared, the image is just being weird, on cutter they all come out from the 4 attacks, on piercer they're all horizontal, and on warden they're all vertical. As for back slicer those move onlys are vertical paths coming from the teleports and the paths extend only from the horizontal and vertical attack/moves but don't extend from the diagonals that was just so I could still place them there

Loading...

PieceMaker-Warden.png
Here's the edits for warden and piercer so they're legal

Warden and Piercer were the only legal pieces, they just had wrong costs.
Supposing this version are meant like this:

grafik.png

Then this version of Warden costs

9.7

grafik.png

+2x(0.5+0.5x0.5):2 [2x Range 2 (Path) Move or Attack backwards anchored in range 2 sidewards]
+0.8x2x(0.4+0.4x0.5):2 [2x Range 3 (Path) Attack only backwards anchored in range 3 sidewards]
+0.8x4x(0.3+0.3x0.5):2 [2x Range4 (Path) Attack only backwards anchored in Range4 sidewards and 2x Range5 (Path) Attack only backwards anchored in Range5 sidewards]
=11.65

=12
and piercers costs are correct at 7.

 4 years ago (edited)

Okay I'll keep that piercer then and I'd like to remove attacks from the furthest away on warden until it costs 11 but path calculations are weird can you do that for me? Also I'm changing back slicer to this and using 2 of it and only 1 cutter
PieceMaker-Back Slicer.png

PieceMaker-Cutter (1).png

 4 years ago (edited)

This 3 pieces are valid at the shown cost:
(Piercer, Warden and BackSlicer)
Now you just need a 5 cost champion for a valid army.

grafik.png

grafik.png

grafik.png

The new version of Cutter costs

3.6

grafik.png

+0.8x4x(0.4+0.5):2 (4x Range3 (Path) Attack only anchored in range 2)
=5.04

=6

Alright what could I cut off of cutter to make it 5 cost?

Spider, Spider, Frog, Princess+++, Penguin, Frog, Duelist, Duelist
9, 10, 11, 15, King, 11, 10, 9

King = Front-Armored King (+5, front 5 squares with armor, rep. HauntedArmor)

The other champions are:
[7.995] fKAaf+4X4 (rep. Legionary+0)
[9] f+4X4mbDT (rep. Legionary+1)
[9.975] f+4X3af+5X5mbDT04 (rep. Legionary+2)
[10.98] f+3X3af0444jffNmbDT (rep. Legionary+3)
[15] f+5X5jfDN (rep. Dragon++)

This can be seen with the bexport notation in the piecemaker, or these:

8 + 9 + 9 + 10 + 10 + 11 + 15 + 5 is 77

unknown.png

Honestly I spent way too long even trying to think about the costings, and maybe this is just an overcomplicated waste of time and it'd be better if the tournament only had 1-2 'custom' pieces.

Your army is valid.
Notice that you didn't have to publish which minions you use and that you can change them anyway before/ after every game.

Sorry for the delay I forgot about it and then had exams but that in no way should excuse my stupidity and immense procrastination. Anyway I tried to make my pieces interesting and allow for tactics (imo the lack of tactics in CEO is one of the largest problems with it) to make the games interesting instead of completely exploiting the point system.
Screenshot_2021-01-27 Feature Creep CEO PieceMaker (modded by main_gi)(1).png
Bishop 2.0 (x2) will be represented by bishop+ Strange knight will be represented by Dragon. Poor defender(x2) will be represented by Knight++ Queen-- will be represented by Queen.
Screenshot_2021-01-27 Feature Creep CEO PieceMaker (modded by main_gi)(2).png
King will be represented by king. Monstrosity will be represented by... uh... ninja. Please let me know if I screwed anything up and I will hopefully not take another month and a half to fix it. On another note I will sponsor 200 rp to the tournament.

 4 years ago (edited)

Your army is valid! Don't forget that the pieces with range 3 (Unblockable)s can't act until turn 3.

cool I might need a little more time to actually play because I can't get into CEO atm

Coin Marketplace

STEEM 0.19
TRX 0.17
JST 0.030
BTC 79799.02
ETH 3205.64
USDT 1.00
SBD 2.73