Devil Gundam: Arm Modification Part 10

Hi guys!

Here are my updates on my Project Devil Gundam.

Following on my last modification. I've decide to attach the seat for the thrusters on the armor itself instead of the arm inner frame.

I started by marking the spot I want to trim using flat blade hobby knife

I made sure that I didn't mark to low because it is easier to trim the plastic lower later if necessary.

Using flat blade mark the rest of the plastic area I wanted to trim

Slowly cut deeper into the plastic using flat blade

A little bit deeper

Using file I trimmed of the excess

I trimmed until the marked I made earlier

Test Fit #1 using simple blu tack

Test Fit #2

Test Fit #3

The scratches can easily be clean using several tools later. I will still give more details on this armor later. For now the overall looks good. Also, there still the other side of the arm I need to modify as well.

So, those are my updates for today.

Keep on building! Keep on steeming! Have a nice day!