Full API Node Update - 9/6/2018
Full API node update - (9/6/2018)
2018-06-08T19:00:02 - 2018-06-09T17:00:03 (UTC)
@fullnodeupdate provides daily updates about the state of all available full API node server.
More information about full nodes and a complete RPC node list can be fund in this post.
get_config
API call
This API call is available on 0.19.3 and 0.19.4 nodes.
List of failing nodes
This table includes a list of all nodes which were not able to answer to a get_config
api call within 30 seconds.
node | hours with failure | percentage |
---|---|---|
wss://rpc.steemviz.com | 1/23 | 4.3 % |
https://rpc.steemviz.com | 1/23 | 4.3 % |
https://gtg.steem.house:8090 | 4/23 | 17.4 % |
https://rpc.curiesteem.com | 6/23 | 26.1 % |
https://api.steemitdev.com | 9/23 | 39.1 % |
https://appbasetest.timcliff.com | 11/23 | 47.8 % |
wss://appbasetest.timcliff.com | 11/23 | 47.8 % |
https://steemd.steemgigs.org | 23/23 | 100.0 % |
wss://steemd.steemgigs.org | 23/23 | 100.0 % |
https://seed.bitcoiner.me | 23/23 | 100.0 % |
wss://seed.bitcoiner.me | 23/23 | 100.0 % |
wss://rpc.steemliberator.com | 23/23 | 100.0 % |
https://rpc.steemliberator.com | 23/23 | 100.0 % |
List of working nodes (At least once in the last 24h)
node | time [s] | mean time [s] | version |
---|---|---|---|
wss://rpc.steemviz.com | 0.21 - 1.35 | 0.38 | 0.19.3 |
wss://steemd.minnowsupportproject.org | 0.23 - 2.22 | 0.58 | 0.19.3 |
wss://appbasetest.timcliff.com | 0.31 - 1.59 | 0.62 | 0.19.4 |
wss://rpc.buildteam.io | 0.32 - 1.64 | 0.68 | 0.19.3 |
wss://steemd.pevo.science | 0.22 - 6.48 | 0.77 | 0.19.2 |
https://api.steemit.com | 1.35 - 2.11 | 1.77 | 0.19.4 |
https://api.steemitdev.com | 1.40 - 2.06 | 1.81 | 0.19.4 |
https://rpc.buildteam.io | 1.07 - 9.53 | 2.43 | 0.19.3 |
https://api.steem.house | 2.83 - 3.16 | 2.95 | 0.19.4 |
https://rpc.steemviz.com | 4.55 - 5.09 | 4.65 | 0.19.3 |
https://steemd.pevo.science | 4.51 - 14.44 | 6.48 | 0.19.2 |
https://steemd.minnowsupportproject.org | 9.06 - 14.59 | 9.41 | 0.19.3 |
https://appbasetest.timcliff.com | 11.12 - 12.69 | 11.31 | 0.19.4 |
wss://steemd.privex.io | 0.26 - 61.70 | 16.55 | 0.19.3 |
https://gtg.steem.house:8090 | 6.55 - 103.60 | 18.01 | 0.19.3 |
https://rpc.curiesteem.com | 8.30 - 78.34 | 19.10 | 0.19.3 |
Streaming blocks
In this test, it is measured how many blocks a node can stream in 30 seconds.
List of working nodes - block streaming
This table includes all nodes which were able to stream at least one block within 30 seconds.
The achieved minimum and the maximum blocks per seconds values are shown.
node | block/s | mean block/s |
---|---|---|
wss://rpc.steemviz.com | 12.9 - 16.0 | 14.6 |
wss://steemd.pevo.science | 11.5 - 16.5 | 14.2 |
wss://steemd.minnowsupportproject.org | 12.7 - 15.7 | 14.2 |
wss://appbasetest.timcliff.com | 9.1 - 16.5 | 13.5 |
wss://steemd.privex.io | 4.5 - 16.8 | 12.5 |
wss://rpc.buildteam.io | 7.4 - 14.0 | 11.6 |
https://api.steemit.com | 2.8 - 3.1 | 3.0 |
https://api.steemitdev.com | 2.7 - 3.1 | 3.0 |
https://rpc.buildteam.io | 1.0 - 1.7 | 1.5 |
https://api.steem.house | 0.8 - 1.0 | 0.9 |
https://rpc.steemviz.com | 0.5 - 0.5 | 0.5 |
https://gtg.steem.house:8090 | 0.0 - 0.7 | 0.4 |
https://steemd.minnowsupportproject.org | 0.2 - 0.2 | 0.2 |
https://appbasetest.timcliff.com | 0.2 - 0.2 | 0.2 |
https://steemd.pevo.science | 0.1 - 0.2 | 0.2 |
https://rpc.curiesteem.com | 0.0 - 0.2 | 0.1 |
Account history
In this test, it is measured how many account operation a node can stream in 30 seconds.
List of working nodes - account history
This table includes all nodes which were able to stream at least one account history operation within 30 seconds.
The achieved minimum and the maximum account transaction per seconds values are shown.
node | hist/s | mean hist/s |
---|---|---|
wss://rpc.steemviz.com | 408.7 - 540.3 | 472.1 |
wss://steemd.minnowsupportproject.org | 404.3 - 573.5 | 467.0 |
wss://rpc.buildteam.io | 377.5 - 508.3 | 434.2 |
wss://steemd.privex.io | 355.6 - 602.2 | 433.5 |
https://rpc.buildteam.io | 379.2 - 482.4 | 419.4 |
wss://steemd.pevo.science | 189.6 - 512.0 | 405.0 |
https://api.steemitdev.com | 187.6 - 223.1 | 205.4 |
https://api.steemit.com | 179.5 - 226.9 | 201.0 |
https://rpc.steemviz.com | 136.2 - 155.2 | 146.6 |
https://api.steem.house | 105.6 - 122.2 | 112.4 |
wss://appbasetest.timcliff.com | 59.3 - 166.5 | 99.6 |
https://steemd.minnowsupportproject.org | 69.3 - 71.4 | 70.9 |
https://gtg.steem.house:8090 | 7.7 - 175.4 | 67.0 |
https://rpc.curiesteem.com | 26.9 - 69.1 | 51.5 |
https://steemd.pevo.science | 50.2 - 52.9 | 51.5 |
https://appbasetest.timcliff.com | 5.1 - 5.3 | 5.2 |
Receiving a vote, a comment, and an account
In this test, the mean duration to receive an account, a comment, and a vote is measured.
List of working nodes - api calls
This table includes all nodes which were able to answer all three api calls within 30 seconds.
The achieved minimum and the maximum mean time durctions are shown.
node | time [s] | mean time [s] |
---|---|---|
wss://rpc.steemviz.com | 0.041 - 0.132 | 0.067 |
wss://steemd.pevo.science | 0.042 - 0.140 | 0.068 |
wss://steemd.privex.io | 0.045 - 0.181 | 0.073 |
wss://steemd.minnowsupportproject.org | 0.043 - 0.181 | 0.081 |
wss://appbasetest.timcliff.com | 0.059 - 0.133 | 0.084 |
wss://rpc.buildteam.io | 0.044 - 0.182 | 0.085 |
https://api.steemit.com | 0.397 - 0.507 | 0.429 |
https://rpc.buildteam.io | 0.347 - 0.738 | 0.487 |
https://api.steem.house | 1.063 - 1.170 | 1.094 |
https://gtg.steem.house:8090 | 1.176 - 2.807 | 1.599 |
https://rpc.steemviz.com | 1.833 - 2.484 | 1.868 |
https://steemd.pevo.science | 2.017 - 3.316 | 2.237 |
https://steemd.minnowsupportproject.org | 3.551 - 3.680 | 3.659 |
https://appbasetest.timcliff.com | 4.000 - 4.065 | 4.008 |
https://rpc.curiesteem.com | 3.384 - 24.292 | 6.344 |
Summary of working nodes
A node is working, when it could fullfil at least once in the last 24h the following conditions:
- returned data within 30 seconds,
- blocks could be streamed,
- account history was possible,
- votes, a comment, an account could successfully be fetched and were not empty.
The nodes in the following table are ranked by the mean rank of all three node tables shown above.
This table includes only nodes which were passing all three tests sucessfully.
node | block rank | hist rank | call rank | score |
---|---|---|---|---|
wss://rpc.steemviz.com | 1 | 2 | 2 | 155.0 |
wss://steemd.pevo.science | 2 | 3 | 3 | 137.5 |
wss://steemd.minnowsupportproject.org | 3 | 4 | 5 | 135.0 |
wss://rpc.buildteam.io | 6 | 5 | 7 | 115.0 |
wss://steemd.privex.io | 5 | 1 | 4 | 110.0 |
https://api.steemit.com | 7 | 7 | 8 | 100.0 |
wss://appbasetest.timcliff.com | 4 | 16 | 6 | 97.5 |
https://api.steemitdev.com | 8 | 14 | 1 | 95.0 |
https://rpc.buildteam.io | 9 | 6 | 9 | 90.0 |
https://api.steem.house | 10 | 8 | 10 | 77.5 |
https://rpc.steemviz.com | 11 | 9 | 12 | 65.0 |
https://gtg.steem.house:8090 | 12 | 10 | 11 | 50.0 |
https://steemd.minnowsupportproject.org | 13 | 11 | 14 | 45.0 |
https://steemd.pevo.science | 15 | 12 | 13 | 42.5 |
https://appbasetest.timcliff.com | 14 | 15 | 15 | 27.5 |
https://rpc.curiesteem.com | 16 | 13 | 16 | 17.5 |
Set fully working nodes with beempy
https://api.steemitstage.com, https://api.steemitdev.com and nodes with not working results were excluded.
beempy set nodes "['wss://rpc.steemviz.com', 'wss://steemd.pevo.science', 'wss://steemd.minnowsupportproject.org', 'wss://rpc.buildteam.io', 'wss://steemd.privex.io', 'https://api.steemit.com', 'wss://appbasetest.timcliff.com', 'https://rpc.buildteam.io', 'https://api.steem.house', 'https://rpc.steemviz.com', 'https://gtg.steem.house:8090', 'https://steemd.minnowsupportproject.org', 'https://steemd.pevo.science', 'https://appbasetest.timcliff.com', 'https://rpc.curiesteem.com']"
Set fully working nodes with steempy
https://api.steemitstage.com, https://api.steemitdev.com, websocket nodes and nodes with not working results were excluded.
steempy set nodes https://api.steemit.com,https://rpc.buildteam.io,https://api.steem.house,https://rpc.steemviz.com,https://gtg.steem.house:8090,https://steemd.minnowsupportproject.org,https://steemd.pevo.science,https://appbasetest.timcliff.com,https://rpc.curiesteem.com
Receive fully working nodes from json_metadata
of the @fullnodeupdate account
The nodes are also stored in the json_metadata
variable of the @fullnodeupdate account.
The nodes inside the account metadata are updated every hour.
The json_metadata includes the following data:
nodes
- list of nodes that passed all tests.failing_nodes
- list of nodes that did not answer theget_config
call.report
- test results.parameter
- usedbeem
and test parameter.
Example code for python:
from beem.account import Account
import json
acc = Account("fullnodeupdate")
nodes = json.loads(acc["json_metadata"])["nodes"]
acc.steem.set_default_nodes(nodes)
If you like what I'm doing, please consider @holger80 as one of your witnesses. You can use steemconnect.com for approve your vote or go to https://steemit.com/~witnesses and enter my name into the vote field:
This post was created with beem, my python library for steem.