LEARN TO MAKE A FALSE FLAT
STEP 1
To make the false floor, we will fence the land where the mixture will go with bricks or woods. Once everything is dry and we have finished the work, we remove them.
STEP 2
Now with the help of the spatula we mix the cement, the crushed stones and the coarse sand. Remember that for each bag of cement there are 3 of sand and we will work with that proportion to have a very good quality mix. When you have everything well mixed add water to form a consistent paste.
image reference click here
STEP 3
When the mixture is ready, pour it on the previously wet ground with the help of the spatula. Remember that the thickness of our false floor should be between 7 cm to 10 cm approximately. It is important to perform this step and the next step a bit faster because, as mentioned before, cement is a fast drying compound.
STEP 4
To finish level the surface with a rubbing or a wooden ruler. To avoid inconveniences, keep children or pets away until everything is completely dry.
image reference click here
Thanks for reading my blog. Ing. Civil @aliciareyes