Printing my drawings / 描いたものをプリントするには...
I've been drawing digitally to upload to Redbubble.com for printing.
It's been a lot of learning new things mostly and I haven't gotten ready for it yet.
Today, I asked my boss to print out some of my latest drawings on paper so that I could see if I needed to adjust the drawing settings, mostly to look into if I need to draw with higher resolution, bigger line art brushs or simply drawing bigger.
Well, actually I should have done this earlier because I had a feeling that I do need to adjust.
They are printed on regular printing paper (216mm x 279mm) and one of them is printed on slightly larger shiny paper.
And I was right. I do need to draw bigger especially the flower patterns with a bigger brush and of course the bigger resolution is better.
I need to re-draw them 😭😭😭
iPadを手に入れてからRedbubble.comで製品にしてもらうために描いているわけですが、学ぶことの方が多くてちゃんと仕上がったものはあまりありません。
それでも今日は描いたものがどんな感じでプリントされるのか知りたかったので、勤め先のボスに頼んで紙にプリントしてもらいました。
主に画質、イラスト大きさ、それと線画の時に使っているブラシの太さを見るためです。
用紙のサイズが日本の物と少し違うのですが、A4サイズほどの普通のプリント用紙と、少し大きめのツルツルした用紙にプリントしてもらいました。
まあ...なんとなく分かってはいたんですけどね...特に花のパターンはもう少し大きく描かないとダメですね。
ペンももう少し太めで、そして画質に関しては高ければ高いほど良いみたいです。
描き直しだぁ〜 😭😭😭
Oh well, it’s been only just over a month since I started drawing digitally.
It’s been great practicing so it’s all good. I shall try again ;)
デジタルで描き始めて1ヶ月ちょっとですし、良い練習にもなったので無駄ではなかったですけどね。
また頑張ります^^
Are the images that you printed blurry? They look pretty good from the photo you showed ^^.
I rarely print my arts too, so I am not much help here but I've read that printing materials need to be at least 300 to 600 in resolution.
They do look good on the photo isn’t it? The images are not blurry but the lines are too fine to see especially on the smaller prints.
300? 600? Maybe that’s DPI...I was told that I need at least 300 DPI but I don’t know what DPI I have.
These are around 4000 x 3000... I think that is the resolution.
If I want to print on bigger material this needs to be higher.
Hmm are you working mostly on iPad with Procreate? I don't use Procreate but most art programs have both the width x height and the resolution, which is specified in dots per inch (dpi).
I think 4000 x 3000 is good width and height, but you might want to check with people who often print their artwork. And definitely, experiment more with it :).
I’m using MediBang...I can’t figure out Procreate ;(
Yeah, I’d have to experiment more for sure.
Thanks for your help!
Nice painting my friend...
Awesome art.. i like your drawing skills...
Thank you!
黒猫×パターンの絵とても綺麗です✨何だか私もiPad欲しくなってきました(父ちゃん買ってくれないかな……w)
Posted using Partiko Android
ありがとうございます！
iPadでお絵描きは楽しいです。出来るものなら娘たちに一台づつ預けたいくらいです。
お父ちゃん買ってくれますように...^^
うわぁ♡繊細でとても綺麗ですね。
プリントすると、デジタル状態とはまた違って見えるものですね。
なるほど…もっと大きく太くですか…。
これから@djynnさんの作品がどう変わっていくのかも楽しみです。
私はもともと細いシャーペンで描くのが好きで、この繊細な感じが気に入っているのですが、プリントするには少し繊細すぎるみたいです。
ありがとうございます。頑張ります！
Wow! really? Learning mistakes, right? Sure you will have more fun!
but in the picture they do not look bad!
It must be in person.
the biggest brushes? as well?
In what resolution are you doing
I know! They don’t look too bad on the picture but I almost want to zoom it with my finger ! Hahaha
Resolutions is around 4000 x 3000 and I use the brush size 5px on MediBang...
Hehehehe is a crazy sensation.
Since I'm doing digital drawings something crazy happens to me because when I draw traditionally I want to zoom or rotate the image and cut and then I laugh a lot, heheh.
If I spend a few years drawing like this, I will not know what the paper and the colors are. Hehehhehe
Well, the resolution must be known very well to have a job to print.
I hardly do the sketches directly in PS I usually scan it and then I pass it to PS, when I scan it I do it in 600 PPP in PNG and when the drawing is finished it is 5045x3200 pixels, well it depends on the drawing, but they are very big and they weigh much
When I make the sketch in PS I have seen videos that say they do it in A3 format of 300 pixels.
I saw in some videos that the size of the lineart brush is 8px.
But I have to ask someone who knows this well hehehe.
I become an eight with so many measures.
Practice makes perfect. :-)
Yes! ;)
Congratulations! This post has been upvoted from the communal account, @minnowsupport, by djynn from the Minnow Support Project. It's a witness project run by aggroed, ausbitbank, teamsteem, someguy123, neoxian, followbtcnews, and netuoso. The goal is to help Steemit grow by supporting Minnows. Please find us at the Peace, Abundance, and Liberty Network (PALnet) Discord Channel. It's a completely public and open space to all members of the Steemit community who voluntarily choose to be there.
If you would like to delegate to the Minnow Support Project you can do so by clicking on the following links: 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP.
Be sure to leave at least 50SP undelegated on your account.
This post has received a 5.00% upvote from @daeshawn!
Thanks!