DIY gpu crypto-rig complete

Follow me/ up vote if you think this information was helpful.
Hello all, just wanted to share some ideas and things I learned in the process of building my first GPU miner.

Basic home items needed.
1- Standard ATX computer case (remove side panel) we will be placing the case on its back side to mount the gpu base.

Example: I removed front cover and one side panel.

2- Install motherboard,psu,cpu/fan,sdd/hdd/, (make sure too connect all the gpu /motherboard cables to the psu before installing the psu inside the case) it will save you time.

3-For mounting the gpu risers I used a thin but durable pinewood board measure it to the width of the case. (Drill mounting holes)

GPU base^^drill holes for the gpu risers.
(notice 2 holes near each other where the gpu risers will go 1 hole to loop through a twist tie) I only tied down 3 sides per riser as I ran out of twist ties.

4- Mounting gpu risers with twist ties (Super easy)

Twist tie's (use simple string if you have too)

5- Mount the GPU base board on the computer case you can use twist ties to hold the gpu base board to the case so it wont slide off.

If you are getting into mining and need help or ideas or just need some info feel free to contact me. I will be more than happy to help fellow steemit readers.
Click up vote if you found this blog helpful Thank you!