You are viewing a single comment's thread from:

RE: My mobile solar photovoltaics system, plus added charging system for battery packs

in #diy7 years ago

I could, but I will have to run a converter back to 12volts for most of what gets run from it.I could easily reconfigure the battery bank though. so that's a plus.

Sort:  

the MPPT can be set to charge 12V. That's one of the ways it is able to gain efficiency. When the panels are at 1/2 voltage (shade, or when the sun is oblique), they will still be at 18V, so the charger is able to charge your batteries... At full power, the MPPT charger determines the maximum power it can extract from the panels and charges the batteries at that rate (for bulk charging).

running the panels in series, and higher voltage, also allows for smaller wire to be run from the panels to the charger...

The chargers are expensive, and on small setups its usually cheaper to add another panel to gain WH, but with our systems being constrained on size (they need to fit on a vehicle) adding panels is not always an option...

Coin Marketplace

STEEM 0.16
TRX 0.14
JST 0.028
BTC 59131.70
ETH 2599.11
USDT 1.00
SBD 2.40