The process of making miniature mosque banda aceh from glass material.

In 2015 I visited the baiturrahman banda aceh highway mosque. With the majestic mosque baiturrahman banda aceh. I was inspired to make a miniature mosque from glass.

While looking at the historic mosque my intention is getting stronger to make it.
With a moment of silence, I immediately took part of the photo of the mosque directly.

And also I took photos outside the mosque like a park, and trees, towers until all the physical mosque I capture directly.

I know it is not easy to make the mosque into a miniature. What's more than glass is really a very difficult job because all the work is done manually.

But with a strong motivation I'm sure all can.

In mid 2015 I started working on it.
And now my little project is running.

Here I want to share photos with friends on @steemit my work for 3 years.

---

This is the shape of the dome I raft with glass. According to the original image of the mosque baiturrahman aceh this is a dome main. The size of the dome I made for my palm. The black glass is round in shape resembling the original dome. Cutting glass is very difficult to do manually and round.

---

This long glass is a mosque fence that I cut with length 1cm and 90cm. With small pieces on it. The green color is a plastic fencing mesh. Similar to the original.

---

This is the main tower of the baiturrahman mosque. His position in front of the mosque. The height of the tower I made is 45cm. The small piece I put on high takes a long time. This tower is long enough manufacture. With one week's time.

---

The process of making tables and arrangement of mosque fences. Table size with width 120cm and length 220cm.

---

The process of making the yard of the mosque. Red carpet as a flat glass base. Before the installation of green carpet as grass or yard.

---

The green carpet is the shape of the mosque courtyard. Installation is done following the circle of the fence. Use green carpets to resemble mosque lawns.

---

This is a photo of a small tower above the mosque. The baiturrahman mosque has 4 small towers above it. The height of the tower is 20cm each. But with 2 different shapes.

---

The process of making mosque walls. The mosque is square. It's a picture of a wall around a mosque. Square size mosque with width 40cm and length 60cm. The hole in the middle is where the lamp is mounted. After later installation of the roof lamp will be closed. So that the light of the lamp will light up around the mosque. It will look like a crystal.

---

This form of miniature mosque that has been completed 60 percent. Everything from glass materials. The next post I will post a few days after the miniature mosque baiturrahman completed 100 percent. Later I will finish a few more until the installation of lights. . And ready perfectly.

---